Alcatel Unleashed

Hi all

i have trouble with INTOF2 Cards and want know if there are some maintenance commands for this board?

Oxe Release 11.0 -30-f running

I get many incidents like this:

30/01/14 18:17:54 001001M|000/05/-/---|=2:3720=C1 Access Pb INTIP3[INTOF/INT2B]Hexa C1Flag:f1,fe[Time],HostFlg:0,0,HstST:0,LINE:0,0,
30/01/14 18:18:18 001001M|000/19/-/---|=2:3720=C1 Access Pb INTIP3[INTOF/INT2B]Hexa C1Flag:f1,fe[Time],HostFlg:0,0,HstST:0,LINE:0,0,

incinfo GEA 3720 not really help ......... im a litte bit confused

with Release 11.0-25f i dont get this incidents but we have install the -30f patch because external Handover was not working.

Did somebody know how i can check if the INTOF2 Cards have the right binarys flashed .........i get incidents with binary download if i put the INTOF2 Cards in ....but may be i can check it like INTIP´s => readhead INTIP

Somebody a idea?

Thanks a lot

Update: with cpl_online 0 5 connect to INTOF2 Card => ?? you can see the binary which is flashed in this case ist 3.1 this are the right binary => so my problem still consist

It is a SW problem in r11.0
You have to wait for R&D.
As soon as fixed I let you know the solution.

Have the same issue
please let me know as well

Having a similar issue here in 2 telephone systems:

-R11.0 Patch 30f
-R10.1.1 Patch 27

in R11 the failur is like this:

26/02/14 07:44:24 000000M|000/13/-/---|=2:3720=C1 Access Pb INTIP3[INTOF/INT2B]Hexa C1Flag:f1,fe[Time],HostFlg:0,0,HstST:1,LINE:0,0,

in R10.1.1 Patch 27 the incident is a little bit different:

09/04/14 10:18:32 000001M|000/08/-/---|=2:3720=C1 Access Pb INTIP3[INTOF/INT2B]Hexa C1Flag:f1,fe[Time],HostFlg:d,0,HstST:a,LINE:2,84

both systems have
duplicated cpu7step2 with io2n
a double intof connection to the remote shelf.
a voicemail system (vpu5/vpm35)
intip boards in the remote shelf.

regards...

Problem is solved with firmware bnvintof (NVTOF2) 3.2 09Apr14_12h22
(Officially solved from R11.0 k1.400.33.a)

Thanks for the information eliott did somebody know the impact for the system .....last week we did a upgrade to r11.0.1 and the binary still 3.1 ...if there no impact i wait for a official patch ...

No impact. You can use the same binary in R10.1.1

Hello,

There is any impact for the users?
I'm opening an eSR but want to know if till i will have an answer to try to update or not the binary provided by Elliot.

Thanks,
Adrian