Alcatel Unleashed

HI,
I want to reset the OAW-IAP92 to default setting.
I use pin to point the the reset hole but there is no response or reset.
Any idea how to reset IAP92 to default setting ...
Please advice .

Thank

From Manual:

Resetting a Remote AP or Campus AP to an OAW-IAP
The reset button located on the rear of an OAW- IAP can be used to reset the OAW- IAP to factory default settings. T
o reset an OAW- IAP, perform the following steps:
1. Power off the OAW- IAP.
2. Press and hold the reset button using a small and narrow object such as a paperclip.
3. Power on the OAW- IAP without releasing the reset button. The power LED flashes within 5 seconds indicating that the reset is completed.
4. Release the reset button. The OAW- IAP reboots with the factory default settings