Alcatel Unleashed

Hi,

I have an issue with DHCP release time in internal DHCP server.

DHCP start time is not accurate with OXE cpu time.

I have tested with new database of R10.1.1. Also NTP servers has not been configured yet.

cpu time is 18:00

But Dhcp release time

Lease 10.17.2.75
start 2013/10/02 01:05:54
end 2013/10/02 02:05:54
stamp 1970/01/01 00:00:00
hardware addr = 00:80:9f:04:bd:f8



My question is NTP server is mandatory to configure in OXE R10.1.1 or did i miss something ?


Thanks
Melan

[align=][/align]


Just joking...
From Ubuntu manuals

Lease times are specified in Greenwich Mean Time (GMT), not in the
local time zone. Since Greenwich is actually on Daylight Savings Time
part of the year, there is probably nowhere in the world where the
times recorded on a lease are always the same as wall clock times. On
a unix machine, one can often figure out the current time in GMT by
typing date -u

Hi Alex,
Thanks for your useful information.
Tc.
Melan

Hahaha that made me laught hard

Sent from my XPeria Z

Hi Alex,

I have non alcatel sip phones.

Can we Increase default lease timer 10 minutes to 120 minutes or more.
I don't want to do it using class ID.( Any setting to change in mgr ?)

Also i have noticed, etc/dhcpd.conf non alcatel lease timer is set to 600.
But will it effect badly if i change ?

Thanks
Melan