Alcatel Unleashed

Hello,

When you upgrade a node 7750, SAM does not detect the node ports and generates the following alarms.

BootParametersMisconfigured
persistentIndexFailure

Someone can enlighten me because it happens and how it repairs.

regards

When the router boots, does it load a config at all?

It sounds like your primary-image pointer. In the bof is set incorrectly, or you did not have persistence turned on during the upgrade. Persistence should always be on in the bof as that creates a security check file (.ndx file on cf3) that it runs against the startup config. If they do not match then you get nothing but a brand new router as if it were never configured before.

The first error message sounds like the primary-config pointer may not be correct anymore, or the sync settings are not correct and your SF/CPM cards are no longer sync'd.