Alcatel Unleashed

Hi,

I am trying to register a dect 500 to an enterprise rel 9.1. on an ibs dect system.

I am using the normal procedure with dectinston for registration.

Extension is programmed as Gap Handset.

It is registering but it is not ringing back when registered. Once registered I can make a call from the dect 500 to another set but I cannot call the dect 500 set.

Is there any particular thing to be done which is different from the the registration of other dect sets?

I tried registering other dect handsets with the same system and all worked fine.
I also registered the 500dect to an oxo and it worked fine.

Regards
Wallace

Did you tried with GAP+ ?

Bonjour a tous
Je crois qu'il faut un OXE en R10

so the mobile 500 dect work on enterprise rel 10 upwards?

I tried with gap+ also but still didn't work.

but on the notes it is said to be a normal gap handset not a gap+ anyways

sorry for my poor english...
but in the comtech TC0274 -compatibilities DECT- you can read after traduction
the mobile "Alcatel-Lucent 500 DECT Handset" is compatible uniquement en mode GAP (not GAP + or AGAP) à partir des versions suivantes :
• ≥ J1.410.34.c : R10.0
• ≥ I1.605.28 : R9.1
• ≥ H1.301.50.c : R9.0

i hope is the answer you are waiting...

yes that's it!

thanks very much!

I´m with same problem but how do you solved wallace?