Omnivista not reporting link status traps
Posted: 11 Dec 2012 10:58
Hi all,
we have Omnivista 3.4 installed with Omniswitch 6850 switches configured with SNMP V3.
The NMS can receive some traps, but when an interface changes state it does not report the link state traps.
The switch is correctly configured with the correct user name and snmp v3 config etc.
The Omnivista appears to be configured correctly.
It polls ok etc
Any suggestions would be appreciated
Cheers
Tony
we have Omnivista 3.4 installed with Omniswitch 6850 switches configured with SNMP V3.
The NMS can receive some traps, but when an interface changes state it does not report the link state traps.
The switch is correctly configured with the correct user name and snmp v3 config etc.
The Omnivista appears to be configured correctly.
It polls ok etc
Any suggestions would be appreciated
Cheers
Tony