Page 1 of 1
Loading 9.1 version on CS-2 without success
Posted: 22 Oct 2012 09:26
by maria.para
Hello,
I am trying to load on a CS-2 the release I160521 but without success.
I am using the pc installer that this version gives(2.24), I have disable the firewall and i have tried to do this procedure on many pcs but the result is the same.
The problem is that the CS-2 doesn't boot from network!
Do you have any ideas for my problem?
Thanks in advanced!
Re: Loading 9.1 version on CS-2 without success
Posted: 22 Oct 2012 09:52
by Konstantinos.E
do you c on the serial port trying to boot from network?
do you use win7? if yes try with xp
Re: Loading 9.1 version on CS-2 without success
Posted: 03 Dec 2012 05:06
by maria.para
Hi,
Unfortunately i tried the procedure from a win7 pc and from a windows xp but the behavior is exact the same.
I tried to upload version 10 also but without success. Even when i boot the cs and i select the choice "grubboot ETHER" the cs doesn't accept the choice.
Maria
Re: Loading 9.1 version on CS-2 without success
Posted: 03 Dec 2012 06:04
by tot3nkopf
maria.para wrote:
Even when i boot the cs and i select the choice "grubboot ETHER" the cs doesn't accept the choice.
What does it mean it doesn't accept the choice? Any incidents?
Re: Loading 9.1 version on CS-2 without success
Posted: 03 Dec 2012 09:56
by maria.para
tot3nkopf and Konstantinos.E thank you very much for your help.
Finally it worked. I entered manually the command grubboot ETHER and i downloaded the latest version of PC installer 3.4 from BPWs.
v3.2 has some bugs for the upgrade of the cs-2. So with the latest pc installer everything worked fine .
Thank you very much !