Page 1 of 1
this message (call your fitter) appears on set
Posted: 04 Sep 2012 05:52
by Sam2009
hi all
i have oxe R9.1
this message " call your fitter " appears on all ip phone set. why this message?
what i can do???
can anyone help me.
Re: this message (call your fitter) appears on set
Posted: 04 Sep 2012 06:59
by vad
Some problem with licences - wrong OPS files, OPS files from another system, problem with hardkeys, programmed more items then allowed in OPS files (f.e. call by name) ....
Check incidents (about Software Package error), check OPS files (spadmin command).
Re: this message (call your fitter) appears on set
Posted: 05 Sep 2012 03:46
by haroun
As VAD wrote you have ops problem
oxe>spadmin
1.Display current counters
CHECK IF PANIG FALG =1
IF YES
THEN 2-Display active file to see wich package is on issue
Re: this message (call your fitter) appears on set
Posted: 16 Dec 2024 22:55
by Modassir1990
How to resolve this problem
All set issue
Call your fitter
Re: this message (call your fitter) appears on set
Posted: 18 Dec 2024 16:05
by Veit_privat
spadmin by console/ or over telnet/ssh to figure out the error details.
Re: this message (call your fitter) appears on set
Posted: 14 Jan 2025 18:08
by frank
Enter the command "sprecover" to remove the message, but you'll still have a degraded PBX because of license issue.