Page 1 of 1

Ringing volume control

Posted: 13 Jun 2012 09:16
by gerinemo
is it possible to restrict 1 user from adjusting volume control on 4068ip oxe R9.1
he keeps turning the volume down & others in the group dont know the phone is ringing

this solution does not appear to work
viewtopic.php?f=246&t=19515

thanks

Re: Ringing volume control

Posted: 09 Jul 2012 10:21
by gerinemo
Bump

Re: Ringing volume control

Posted: 23 Jul 2012 06:46
by Mati
Hi, I've the same problem... ¿you have find any solution?


Making a telnet to the set you can change the volume level, but not block the user to adjust it.

Re: Ringing volume control

Posted: 23 Jul 2012 13:38
by gerinemo
No i had to disassemble the phone and put insulating tape over the circuts that are below the volume + & - buttons
then had to remove the display and do the same for the 3rd key on left which gives an option to silence the phone for that call
this was on a 4068 set

Re: Ringing volume control

Posted: 18 Jan 2021 10:21
by glandi
Hi,

Do you have the telnet command to change the volume on the phone ?
I checked with audioconfig and ringer level but it doesn't work.

Thanks

Re: Ringing volume control

Posted: 18 Jan 2021 22:47
by vad
glandi wrote: 18 Jan 2021 10:21 Hi,
Do you have the telnet command to change the volume on the phone ?
I checked with audioconfig and ringer level but it doesn't work.
Thanks
You want to ajust 4068 via telnet?

Re: Ringing volume control

Posted: 19 Jan 2021 09:36
by glandi
I would like to adjust the ringtone volume on ip phone (mainly iptouch 4028).
I checked with our phone provider, for him it's impossible but according to Mati it is.
Or any other way to set the ringtone volume remotely.