auto call on lift

[geovillage]

Hi , i must set user for Lift Emergency call.
Lift's support ask me to configure a user that automatic call user 8114 when lift ( open the line , sorry for my tecnical English i'm italian ).
Can you help me to find correct secting to do this?
Thanks in advance, Adriano

[murraya]

hi, there are 3 stages to do this,
1: set up a routing table say number 1
2: setup a tel facility catagory with direct routing set to immediate
3: in the user give them the tel fac catagory and enter the routing table you have configured in the routing table of the user.

[tjm0852]

Why not put the user in Phone Features COS 31 and make the associated set to 8114. Ring down circuit, so as soon as a switch hook is detected it will ring the associated set.

Maybe I am misunderstandng the question.

[tot3nkopf]

Why not put the user in Phone Features COS 31 and make the associated set to 8114. Ring down circuit, so as soon as a switch hook is detected it will ring the associated set.

Maybe I am misunderstandng the question.

They need hotline feature --> Lift emergency button pushed --> off hook --> routing at of hook to predefined number.

[geovillage]

hi, there are 3 stages to do this,
1: set up a routing table say number 1
2: setup a tel facility catagory with direct routing set to immediate
3: in the user give them the tel fac catagory and enter the routing table you have configured in the routing table of the user.

I resolve with this solution. Thank you very much to all

[michib]

hi, there are 3 stages to do this,
1: set up a routing table say number 1
2: setup a tel facility catagory with direct routing set to immediate
3: in the user give them the tel fac catagory and enter the routing table you have configured in the routing table of the user.

hi,

where can i set the routing table?

best regards,
michi

[vad]

specific telephone srvices/ routing tables