Alcatel Unleashed

Hi,

Anybody knows the reason for a stack to be in operational status DOWN ?

Module in slot 3
Model Name: OS6850-U24X,
Description: 24 G SFP + 2 10 G,
Part Number: 902418-90,
Hardware Revision: 09,
Serial Number: M2581169,
Manufacture Date: JUN 17 2011,
Firmware Version: ,
Admin Status: POWER ON,
Operational Status: DOWN,
Power Consumption: 0,
Power Control Checksum: 0xbf16,
CPU Model Type : Motorola MPC8248,
MAC Address: e8:e7:32:0a:54:88,
ASIC - Physical 1: BCM56504_B2,
CPLD - Physical 1: 0019/00,
UBOOT Version : 6.4.3.479.R01,
UBOOT-miniboot Version : 6.4.3.479.R01,
POE SW Version : n/a


I have 3 stacks and i don't have any error messages during the synchronization:

swag# write memory flash-synchro
File /flash/working/boot.cfg replaced.
This file may be overwritten if "takeover" is executed before "certify"
Setting CERTIFY Timeout for 800 seconds
from /flash/working to /flash/certified
Copying boot.cfg .................... completed

CERTIFY process completed successfully
Flash Synchronization process started
+++ == CSM == Stack 1 Certify process Completed
+++ == CSM == Stack 3 Certify process Completed
+++ == CSM == Stack 2 Certify process Completed
Flash Synchronization process completed successfully

Take a look at stack status:
show stack topology

Maybe a problem of power supply? Did you check this: "Power Consumption: 0"