Page 1 of 1
How to change the telnet port of your PABX
Posted: 23 May 2007 11:27
by frank
This will explain you how to do it.
Remember that telnet is NOT secure anyway. If you are looking for a secured way of getting into the box, activate IP security with SSH.
Re: How to change the telnet port of your PABX
Posted: 10 Jun 2015 07:02
by Onyebuchim
I am trying to telnet into my Alcatel OmniPCX but it goes blank on DOS screen. I tried pinging the Server and it works but Telnetting does not work.
How do i bypass it or get access to it.
Please help
Re: How to change the telnet port of your PABX
Posted: 10 Jun 2015 08:48
by haroun
your pc ip adress is it recognised by your oxe ? check out under netadmin -m
creat at least a static route from oxe to host
Re: How to change the telnet port of your PABX
Posted: 10 Jun 2015 08:59
by haroun
lol
you're not login via telnet so the procedure above should be done under v24 console
use v24 serial port and check security and static route