Alcatel Unleashed

Hi all..

I operating call center.

then, We will change IP phone address with DHCP server.

so OXE and etc boards ip is static and only IP phone ip address is get from DHCP Server.

but this config is not ok.. IP phone cann't tftp IP from DHCP server.

DHCP server is send to ipPhone IP address and vlan tag and OXE IP address.

and IP phone config push i + # and mode is DHCP mode and vlan check and vlan tag 14.

save and reboot but 2/5 is not going....

why do not alive ip phone ?

pls answer the question....

Hi thkim81

Did you change the ip address of the OXE ?

If you did that, did you launch the lanpbxbuild command to update the lanpbx.cfg file ?

regards,

Turlupin