Alcatel Unleashed

This is a real puzzle. I have a Power CPU with a VoIP daughter board. no the system is coming up with errors like DSP for VoIP KO.( Out of service)
I tried a warm restart, but still no IP Phones working. Only digital and analogues are working at the moment.
Should I LOLA or just do a software upload?

Jtmurphy76 wrote:This is a real puzzle. I have a Power CPU with a VoIP daughter board. no the system is coming up with errors like DSP for VoIP KO.( Out of service)
I tried a warm restart, but still no IP Phones working. Only digital and analogues are working at the moment.
Should I LOLA or just do a software upload?

I have seen this, too. I didn't have time to dig around the problem. It looked for me like the CPU could only use the enbedded DSP's and not the Armada ones, although Armada is recognized by the system).
My release is 800/034.001
For me is not a capital issue (for the time being) as the project was put on hold (only 40 IP phones and 4 SIP trunks used --> so embedded DSP should do). We should look if this is corrected in newer patches.

I am waiting for the replacement Armada VoIP daughter-board. After a LOLA I still get an error DSP for VoIP is KO. Am I missing something that must be enabled under the system labels? I have 80 IP phones, with another 10 on the way. No IP trunks just ISDN basic rate.

Is a stupid question but... Did you marked "Voice Over IP" when you did LOLA?

giovanni.attolini wrote:Is a stupid question but... Did you marked "Voice Over IP" when you did LOLA?

Of course we did.....

This error is fixed on release ...41.001!

Thank you;
Currently downloading the latest target.
Happy Days