Page 1 of 1
Call Limit R7.1
Posted: 05 May 2011 22:04
by ehia
Hello Guys got a problem with our OXO. How can i configure/manage the time limit call? If im going to make a call it will release the call after 30seconds... Hope anyone could help me how to configure it.. Thank You
Re: Call Limit R7.1
Posted: 05 May 2011 22:47
by vad
TG - special services=timed call release.
Phone feature COS - rights timed call release=1
System/ timers 260 - duration.
Re: Call Limit R7.1
Posted: 05 May 2011 23:33
by ehia
vad wrote:TG - special services=timed call release.
Could you please tell me how can I set this?
Phone feature COS - rights timed call release=1
System/ timers 260 - duration.
Re: Call Limit R7.1
Posted: 06 May 2011 00:09
by vad
OXO!!! Sorry!
Re: Call Limit R7.1
Posted: 06 May 2011 00:15
by vad
User/ details/ restriction-barring - Outgoing call duration (no limit, level 1, 2, 3)
Trafic sharing & barring/ outgoing call duration classes.
Re: Call Limit R7.1
Posted: 06 May 2011 01:36
by ehia
Thanks Vad. my configuration is same what you had given. ITried to warm reset but the problem is still the same....
Re: Call Limit R7.1
Posted: 06 May 2011 02:19
by vad
Send some info to e-mail (may be you need some additional management)
- system must determinate type of calls - City, National, International;
- and this feature works for public trunks (not for private).
Re: Call Limit R7.1
Posted: 06 May 2011 21:44
by ehia
Hi Vads. Thank you for the quick response. It was working fine now..
Re: Call Limit R7.1
Posted: 05 Jan 2018 02:44
by Group300
vad wrote: ↑06 May 2011 02:19
Send some info to e-mail (may be you need some additional management)
- system must determinate type of calls - City, National, International;
- and this feature works for public trunks (not for private).
Hi!
Could you show me how to determinate type of calls?
I tried and sure that out trunks are public trunks.
Thank for reading!