Page 1 of 3
Cannot connect to PowerCpu using OMC Serial
Posted: 21 Apr 2011 10:31
by wallacezammit
Hi
I am trying to connect serially (using OMC rel8) to a powercpu but cannot. I tried it with different Powercpu's and from different pc's but still couldnt work. I checked the cable just in case but it's ok.
Was there any change to connect serially to a powercpu?
Regards
Wallace
Re: Cannot connect to PowerCpu using OMC Serial
Posted: 22 Apr 2011 01:15
by vad
At first - connect V24 (115 kbits) and use some terminal programm - if you will see how OXO started (many message like process and so on started) - you need to change V24 mode
Re: Cannot connect to PowerCpu using OMC Serial
Posted: 25 Apr 2011 10:50
by wallacezammit
Hi
With hyperterminal 115kbits I can see activity going on. I also tried both ways with swap_serial but still couldn't connect serially.
Did you manage to connect serially with a Powercpu?
Re: Cannot connect to PowerCpu using OMC Serial
Posted: 26 Apr 2011 04:27
by julysavov
I also have the same problem and can't find the solution!
Re: Cannot connect to PowerCpu using OMC Serial
Posted: 29 Apr 2011 03:11
by ae225
Hi,
Have the same problem and submit an eSR to ALU. Been 2 weeks and now in observation sheet with R&D.
Understand that there are similar cases reported. So, hang in there. A solution will be found soon.
Rgds.
Re: Cannot connect to PowerCpu using OMC Serial
Posted: 02 May 2011 07:53
by wallacezammit
Ok Tnx!
Regards!
Re: Cannot connect to PowerCpu using OMC Serial
Posted: 05 May 2011 02:21
by wallacezammit
any news on this issue?
Regards
Re: Cannot connect to PowerCpu using OMC Serial
Posted: 09 May 2011 02:35
by ae225
nope...OS Status:treatment in progress
Rgds.
Re: Cannot connect to PowerCpu using OMC Serial
Posted: 25 May 2011 03:51
by wallacezammit
still no news on this issue?
regards
Re: Cannot connect to PowerCpu using OMC Serial
Posted: 25 May 2011 22:42
by ae225
no, unfortunately. Its still 'treatment in progress' status.
Btw,I'm using usb to rs232 with v24 cable and it fails to login. But a reseller manage to use built-in com port to login with success on same machine and
with my v24 cable! Back in office, I use another notebook with built-in com but no luck. what's wrong with OXO and its firmware?!