Alcatel Unleashed

Hi.

I've noticed that the storage on my 6850's fill up very easily, especially when upgrading the software - is it possible to swap the existing CF card for a larger one, transferring data from the old to the new?

Kind regards
Kjetil Thorstensen
Avis and Budget Rent A Car, Scandinavia

hello

I think there is no memory update in the ALU catalogue.

But if you follow update procedure you will have no issue with that.

Cedric

cedric1 wrote: But if you follow update procedure you will have no issue with that.

Especially IF you follow the procedure in A-Ls "Upgrade Instructions" you will run into low memory trap!

I had this warnings on every OS6850 following the upgrade path from old Firmware (<6.3.4) to the newest software:

+++ WARNING 12: Synchronization commands will not be accepted due to low flash
+++ space systemwide. Remove unwanted files from Primary before continuing

But if you delete unneeded files from old firmware BEFORE you synchronise working to certified directory it should work.

hello

thx for this info .

What do you mean by "unneeded files from old firmware" and on which switch do you remove theses files ?

thx

Cedric

cedric1 wrote:What do you mean by "unneeded files from old firmware" and on which switch do you remove theses files ?

You could remove the content from the directory /flash/switch temporary if not used (I don't recommend this) or remove old firmware files which are not used by releases >6.4.3: k2diag.img/kdiag.img and krelease.img

Ok

I see there still some unused file for old version wich still there. Good to know we can permanently delete it.

Cedric