Alcatel Unleashed

ert_manz wrote:Hi all,

can anyone help me with sample config for QOS,
im little confuse for step-by step to create QOS like bandwith limitting or traffic shapper,

in the middle is MPLS (VPLS) already perform

so for the sample i have 3 customer ,
customer 1 bw 128kbps
customer 2 bw 256kbps
customer 3 bw 512kbps

can i limit the bandwith based on the services at the eggress port (in case just 1 port but carry 3 services for 3 customer )

thanks in advance

configure qos
        scheduler-policy "bandwidth" create
            tier 1
		scheduler "128K" create
                    rate 128
                exit
		scheduler "256K" create
                    rate 256
                exit
		scheduler "512K" create
                    rate 512
                exit
exit all
#assume vpls hasn't been created
configure service customer 1 create 
configure service customer 2 create 
configure service customer 3 create 

configure service vpls 11 customer 1 create
      sap 1/1/1:11 create
                description "customer 1"
                egress
                    scheduler-policy "128K"
                exit
            exit
exit
configure service vpls 12 customer 2 create
      sap 1/1/1:12 create
                description "customer 2"
                egress
                    scheduler-policy "256K"
                exit
            exit
exit
configure service vpls 13 customer 3 create
      sap 1/1/1:13 create
                description "customer 3"
                egress
                    scheduler-policy "512K"
                exit
            exit
exit

agungaryo wrote:CMIIW,
I presume , 7210 is TiMOS
and 1 port 3 service with Diffrentiated by VLAN , so in it 'd be in the different SAP
3 services ,3 customer
it could be like this :

Code: Select all

configure qos
        scheduler-policy "bandwidth" create
            tier 1
		scheduler "128K" create
                    rate 128
                exit
		scheduler "256K" create
                    rate 256
                exit
		scheduler "512K" create
                    rate 512
                exit
exit all
#assume vpls hasn't been created
configure service customer 1 create 
configure service customer 2 create 
configure service customer 3 create 

configure service vpls 11 customer 1 create
      sap 1/1/1:11 create
                description "customer 1"
                egress
                    scheduler-policy "128K"
                exit
            exit
exit
configure service vpls 12 customer 2 create
      sap 1/1/1:12 create
                description "customer 2"
                egress
                    scheduler-policy "256K"
                exit
            exit
exit
configure service vpls 13 customer 3 create
      sap 1/1/1:13 create
                description "customer 3"
                egress
                    scheduler-policy "512K"
                exit
            exit
exit