Alcatel Unleashed

Hi all,

I would like to monitor how many channels were be used on T2 access and graph it with Cacti for example.
It's for Omnipcx enterprise, but i couldn't found anywhere the correspondant snmp OID to get it.

Any help ?

Thanks in advance.

Hi Oliver,

I'm sorry i don't have the solution but i'm looking for it too.
Did you find out which OID we need to look at ?

Thanks

This feature is available from Release 9.0 of OXE. Check whether it is your case.

Exactly but i can't browse to find the OID myself.
I Can't add the A4400 mib to my snmp tools ....

Everytime there is an error

[quote="ElandrylEverytime there is an error [/quote]
Did you configure SNMP parameters?
OID should start with 1.3.6.1.4.1.637

I open a case and it's not possible ......

This feature was in the roadmap but well ... what kind of people using snmp supervision would supervise trunks ?
So they didn't had it ....
But we can make a snmp request to get the OXE version !
I was enjoying that they add snmp to the OXE but it seems i was wrong ...

You have to send a marketing request throught your respective channel partner, maybe they will add it.

Elandryl wrote:This feature was in the roadmap but well ...
So they didn't had it ....

It is still there in the 9.0 course handouts.


But if you check MIBs - you would not find anything about TGs.

Hello,

Have you find the oid for T2 access?
My customer would like supervise his T2?

Thanks

In R9 it didn't exist, as Alex said it's in courses book, i found it there too..
It was supposed to be added but it wasn't, i'm looking to R10 doc to see if they finally add it !

SNMP 2c

trkAvailable (last octet is Trunk Group Number. i.e. TG 100 on this PBX)
1.3.6.1.4.1.637.64.4400.1.9.1.7.100 = "6" [ASN_INTEGER]

trkUse (last octet is Trunk Group Number. i.e. TG 100 on this PBX)
1.3.6.1.4.1.637.64.4400.1.9.1.8.100 = "0" [ASN_INTEGER]