booting problem with 6850/48L

[Steven Eijzermans]

After a firmware downgrade we have the following problem.



U-Boot (6.3.4.265.R01) (for OS6400, OS6850, and OS6855 platforms) (Dec 15 2008 -
21:31:42)

MPC8247 Reset Status: External Soft, External Hard

MPC8247 Clock Configuration
- Bus-to-Core Mult 4x, VCO Div 2, 60x Bus Freq 25-75 , Core Freq 100-300
- dfbrg 0, corecnf 0x1a, busdf 3, cpmdf 1, plldf 0, pllmf 3
- vco_out 400000000, scc_clk 100000000, brg_clk 100000000
- cpu_clk 400000000, cpm_clk 200000000, bus_clk 100000000
- pci_clk 66666666

CPU: MPC8247 (HiP7 Rev 14, Mask 1.0 1K50M) at 400 MHz
Board: Alcatel OS6850 (Kite II)
I2C: ready
DRAM: 256 MB
FLASH: 8 MB
In: serial
Out: serial
Err: serial

No ethernet found.
IDE: Bus 0: OK
Device 0: Model: CF 64MB Firm: 20060729 Ser#: 2009A 0000331430
Type: Removable Hard Disk
Capacity: 62.5 MB = 0.0 GB (128000 x 512)
USB: scanning bus for devices...
USB device not responding, giving up (status=80000000)
0 USB Devices found
Hit any key to stop autoboot: 0
## Booting image at ff900000 ...
Image Name: miniboot-6.3.4.265.R01
Image Type: PowerPC VxWorks Kernel Image (gzip compressed)
Data Size: 865022 Bytes = 844.7 kB
Load Address: 00005000
Entry Point: 00005000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
## Ethernet MAC address not copied to NV RAM
Loading .text @ 0x01000000 (1385008 bytes)
Loading .rodata @ 0x01152230 (275091 bytes)
Loading .data @ 0x011954c8 (118772 bytes)
Clearing .sbss @ 0x011b24c0 (1556 bytes)
Clearing .bss @ 0x011b3000 (1541436 bytes)
## Using bootline (@ 0x4200): flash(1,0)cmm:default h=192.168.10.1 e=192.168.10.
1:ffffff00 cb=115200 cp=none cs=1 cw=8 cm=modemControlOff f=0x0
## Starting vxWorks at 0x01000000 ...
ataDrv call. 0 1 24 24 621 0 0

CS EEPROM Module ID: 4201221f , System type: 48 port Lite 100Base-T, with 4 comb
o ports, stacking - kite2


Adding 5068 symbols for standalone.


Boot parameters are:

'flash(1,0)cmm:default e=10.255.24.81:ff000000 h=192.168.10.1 g=10.255.24.181 c
b=9600 cp=none cs=1 cw=8 cm=modemControlOff'


AOS miniboot version: 6.3.4.265.R01
VxWorks (for Alcatel CMM Motorola MPC8248) version VxWorks5.5.1
KERNEL: WIND version 2.6
Made on Dec 15 2008, 21:33:19.
Copyright Wind River Systems, Inc., 1984-2006

CPU: Motorola MPC8248. Processor #0.
Memory Size: 0xfa00000 (250 MB). BSP version 1.2/1.

Attempting to load from the CERTIFIED directory...
Loading kernel from '/flash/certified/K2os.img'...
5599280
Loaded 'alcatelNetworking_kernel.lnk' from '/flash/certified/K2os.img'.
Starting at 0x100000...

jþÖñýß

[Steven Eijzermans]

Ok the problem is solved.

I uninstalled hyperterminal en installed Tera Term. Then i could interrupt the boot process , booted in miniboot true uboot and erased the working directory , uploaded all the files with zmodem and rebooted runningversion 2. Works fine again.