Alcatel Unleashed

Hi,
I'm trying to configure VLAN stacking on OS6400.
This is my config file :

-> show configuration snapshot
! Stack Manager :
! Chassis :
system name FTTH
! Configuration:
! VLAN :
vlan 1 enable name "VLAN 1"
ethernet-service ipmvlan 99 name "Multicast_Sy
ethernet-service svlan 403 name "Internet_System"
ethernet-service svlan 2429 name "Unicast_System"
ethernet-service svlan 3601 name "MegaWan"
! VLAN SL:
! IP :
ip service all
! IPX :
! IPMS :
ip multicast status enable
ip multicast zapping enable
! AAA :
aaa authentication console "local"
! PARTM :
! AVLAN :
! 802.1x :
! QOS :
! Policy manager :
! Session manager :
! SNMP :
! IPv6 :
! IPSec :
! RIPng :
! Health monitor :
! Interface :
! Udld :
! Port Mapping :
! Link Aggregate :
! VLAN AGG:
! 802.1Q :
! Spanning tree :
bridge mode 1x1
! Bridging :
! Bridging :
! Port mirroring :
! UDP Relay :
! Server load balance :
! System service :
swlog console level info
debug fscollect enable
! SSH :
! Web :
! AMAP :
! LLDP :
! Lan Power :
! NTP :
! RDP :
! VLAN STACKING:
ethernet-service svlan 403 nni 1/1
ethernet-service svlan 2429 nni 1/1
ethernet-service svlan 3601 nni 1/1
ethernet-service sap-profile "sap-translate" cvlan-tag translate
ethernet-service service-name "Internet" svlan 403
ethernet-service sap 403 service-name "Internet"
ethernet-service sap 403 uni 1/2-3
ethernet-service sap 403 cvlan 100-200
ethernet-service sap 403 cvlan 570-579
ethernet-service service-name "MegaWan" svlan 3601
ethernet-service sap 36 service-name "MegaWan"
ethernet-service sap 36 uni 1/2
ethernet-service sap 36 cvlan 600-700
ethernet-service service-name "Unicast" svlan 2429
ethernet-service sap 240 service-name "Unicast"
ethernet-service sap 240 sap-profile "sap-translate"
ethernet-service sap 240 uni 1/2-3
ethernet-service sap 240 cvlan 2429
ethernet-service service-name "internet" svlan 403
vlan ipmvlan 99 sender-port port 1/1
vlan ipmvlan 99 receiver-port port 1/2
vlan ipmvlan 99 receiver-port port 1/3
ethernet-service service-name "Multicast" ipmvlan 99
ethernet-service sap 99 service-name "Multicast"
ethernet-service sap 99 sap-profile "sap-translate"
ethernet-service sap 99 uni 1/2-3
ethernet-service sap 99 cvlan 2429
vlan ipmvlan 99 address 232.84.1.1-232.84.1.254
vlan ipmvlan 99 ctag 2429
! Ethernet-OAM :
! EFM-OAM :
! ERP :

After that, i added 1 type command : ethernet-service sap 403 uni 1/10
and received an error : Not enough resources for this port
I tried with other ports but still received the same error.
I also searched on service.esd.alcatel-lucent.com but couldn't find the meaning of this error.
Could u explain to me this error ?
Thx !

hello

I think there is a limitation with max cvlan you can carry for a sap

if you delete

ethernet-service sap 403 cvlan 100-200
ethernet-service sap 403 cvlan 570-579

and configure
ethernet-service sap 403 uni 1/10

you will not get this error.

so to solve your issue totaly :

try to configure a new sap 404 linked to the same service (Internet) as sap 403
make
ethernet-service sap 404 uni 1/10
ethernet-service sap 404 cvlan 100-200
ethernet-service sap 404 cvlan 570-579

all will be double tagged with same svlan

Cedric

I remember that there was a bug with regards to the CLI + cvlan assignment. Prior to any extensive troubleshooting I'd like to suggest that you upgrade to the latest AOS release.

Yes he can try both solution and give us a feedback

Cedric

Thx cedric and benny, i configured following your instruction and succeeded.