R 9.1 CS-2 & GD-2 wont load with PC Installer 2.24???

Post Reply
MTConsulting

R 9.1 CS-2 & GD-2 wont load with PC Installer 2.24???

Post by MTConsulting »

Guys,

i am stuck on a site Looong way from home with a new system, I think it has been made up of parts, CS-2 is a 'crash replacement' GD-2 is also blank!!

I am using PC installer 2.24 to try and load 9.1 on the CS-2 and cant get past the bios menu as follows:

Version 1.23.1109. Copyright (C) 2007 American Megatrends, Inc.
ALCATEL CS-2 BIOS VERSION 0ABPT090
CHECKING FOR BATTERY MODE:
BATTERY MODE NOT DETECTED. BOOTING SYSTEM.
Press ^B to enter setup.
Press ^I to boot EFI SHELL

(dont type anything I get)

Intel(R) Boot Agent GE v1.2.16P7
Copyright (C) 1997-2003, Intel Corporation

Initializing and establishing link...

(it looks for a mac for DHCP)...then restarts!

(If I hit Ctrl-S)


Intel(R) Boot Agent GE v1.2.16P7
Setup Menu
<Esc> <Space> <
****************************************************************************
* *
* Network Boot Protocol PXE (Preboot eXecution Environment) *
* Boot Order Use BIOS Setup Boot Order *
* Show Setup Prompt Enabled *
* Setup Menu Wait Time 5 seconds *
* *
****************************************************************************







Select remote boot protocol.
********************************************************************************
<Esc> <Space> <Enter> <F4>
Cancel Changes Change Value Next Option Save Configuration


(If I hit Ctrl-B I get)

Aptio Setup Utility - Copyright (C) 2007 American Megatrends, Inc.
Main Advanced Chipset Boot Security Save & Exit
ZDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDBDDDDDDDDDDDDDDDDDDDDDDDDD?
3 BIOS Information 3Choose the system 3
3 BIOS Vendor American Megatrends 3default language 3
3 Core Version 4.6.3.1 3 3
3 Project Version 0ABPT090 3 3
3 Build Date 5/8/2009 14:22:10 3 3
3 3 3
3 Memory Information 3 3
3 Total Memory 1024 MB (DDR2) 3 3
3 3 3
3 Package SKU EP 80579EZ600C 3 3
3 3><: Select Screen 3
3 System Language [English] 3: Select Item 3 3
3 3Enter: Select 3
3 System Date [Tue 05/31/2005] 3+/-: Change Opt. 3
3 System Time [03:07:36] 3F1: General Help 3
3 3F2: Previous Values 3
3 Access Level Administrator 3F3: Optimized Defaults 3
3 3F4: Save ESC: Exit 3
3 3 3
@DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDADDDDDDDDDDDDDDDDDDDDDDDDDY
Version 1.23.1109. Copyright (C) 2007 American Megatrends, Inc.



(I cant get into boot from etherent menu??, card is in slot 0, have tried various DIL setings?...On is toward the HDD , Off towards the MASSIVE heat sink. I am 1 = ON 2,3,4 = OFF. Is this correct to force a load from ETH?)

Any help greatly appreciated.
Top
MTConsulting

Post by MTConsulting »

I have PC Installer set to Alize & CS-2 and it makes no difference!!!! Am also using crossover cable direct to laptop and static address of 192.168.45.69 CS-2 is .70.
Top
JoelO

Post by JoelO »

You should type ^B and immediately followed by ^I to get the boot menu on the CS HD.
Top
JoelO

Post by JoelO »

Then select boot from Ethernet. You should be choosing Alize and the country, along with direct cable if you are plugged into the PBX.
Top
MTConsulting

Post by MTConsulting »

Hey Joel,

I Type Ctrl B and before i get to type Ctrl I it goes this way:

Aptio Setup Utility - Copyright (C) 2007 American Megatrends, Inc.
Main Advanced Chipset Boot Security Save & Exit
ZDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDBDDDDDDDDDDDDDDDDDDDDDDDDD?
3 BIOS Information 3Choose the system 3
3 BIOS Vendor American Megatrends 3default language 3
3 Core Version 4.6.3.1 3 3
3 Project Version 0ABPT090 3 3
3 Build Date 5/8/2009 14:22:10 3 3
3 3 3
3 Memory Information 3 3
3 Total Memory 1024 MB (DDR2) 3 3
3 3 3
3 Package SKU EP 80579EZ600C 3 3
3 3><: Select Screen 3
3 System Language [English] 3: Select Item 3 3
3 3Enter: Select 3
3 System Date [Tue 05/31/2005] 3+/-: Change Opt. 3
3 System Time [04:26:11] 3F1: General Help 3
3 3F2: Previous Values 3
3 Access Level Administrator 3F3: Optimized Defaults 3
3 3F4: Save ESC: Exit 3
3 3 3
@DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDADDDDDDDDDDDDDDDDDDDDDDDDDY
Version 1.23.1109. Copyright (C) 2007 American Megatrends, Inc.
Top
MTConsulting

Post by MTConsulting »

Intel(R) Boot Agent GE v1.2.16P7
Copyright (C) 1997-2003, Intel Corporation
Co
CLIENT MAC ADDR: 00 80 9F 8D 22 52 GUID: 00020003 0004 0005 0006 000700080009
PXE-E51: No DHCP or proxyDHCP offers were received.

PXE-M0F: Exiting Intel Boot Agent.


(the reboots!!)
Top
MTConsulting

Post by MTConsulting »

have just put a HDD from a working system on this CS-2 and it boots fine??
Top
MTConsulting

Post by MTConsulting »

when I type Ctrl-B i get this only??

Version 1.23.1109. Copyright (C) 2007 American Megatrends, Inc.
ALCATEL CS-2 BIOS VERSION 0ABPT090
CHECKING FOR BATTERY MODE:
BATTERY MODE NOT DETECTED. BOOTING SYSTEM.
Press ^B to enter setup.
Press ^I to boot EFI SHELL
Entering Setup...

















Aptio Setup Utility - Copyright (C) 2007 American Megatrends, Inc.
Main Advanced Chipset Boot Security Save & Exit
ZDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDBDDDDDDDDDDDDDDDDDDDDDDDDD?
3 Password Description 3Set Setup Administrator 3
3 3Password 3
3 If ONLY the Administrator's password is set, 3 3
3 then this only limits access to Setup and is 3 3
3 only asked for when entering Setup 3 3
3 If ONLY the User's password is set, then this 3 3
3 is a power on password and must be entered to 3 3
3 boot or enter Setup. In Setup the User will 3 3
3 have Administrator rights 3 3
3 3 3
3 3><: Select Screen 3
3 Administrator Password 3: Select Item 3 3
3 User Password 3Enter: Select 3
3 3+/-: Change Opt. 3
3 3F1: General Help 3
3 3F2: Previous Values 3
3 3F3: Optimized Defaults 3
3 3F4: Save ESC: Exit 3
3 3 3
@DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDADDDDDDDDDDDDDDDDDDDDDDDDDY
Version 1.23.1109. Copyright (C) 2007 American Megatrends, Inc.
Top
JoelO

Post by JoelO »

You should see this:

Alize BIOS Monitor
*** BIOS Version 3EH30227EIAA bios100/008.033 ***
*** Generated on Nov/04/2004 at 14:51 ***
memory test started lng=133169152 with 0
running flash(soldered=1
socket=0)=1,BIOScase:4,BIOSv24:0,verrou=1,algoNOR=1,size=1,base=3ff80000
DIMM characteristics->: JEDEC Manu ID:h,
Memory type(EDO,FPM..):0x04
# of row address:12
# of col address 10
# of module row 1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI:scan_bus for bus 0
PCI:bus=00h,devfn=00h ,[vendor:device]=[1022h/3000h]
PCI:bus=00h,devfn=60h ,[vendor:device]=[100bh/0020h]
PCI:bus=00h,devfn=98h ,[vendor:device]=[1064h/2101h]
PCI:scan_buses with 00h secondary buses
PCI:command =000003ffH for device 00:00
PCI: Assigning I/O space fc00-fcff for 00:60 BAR=00000010
PCI:Assign memory space bffff000H to bfffffffH for device 00:60
PCI:command =000003ffH for device 00:60
PCI:Assign memory space bfffd000H to bfffdfffH for device 00:98
PCI: Assigning I/O space fd00-fd1f for 00:98 BAR=00000014
PCI: Unable to handle I/O allocation for 00:98 (ff04) BAR=00000018
PCI:command =000003ffH for device 00:98
assigning irq10 to xchange
B0 = 17
DRCTMCTL = 1e
DRCCTL = 18

DBCTL = 11
Set external RTC
Set Internal RTC
No external RTC detected
gpbus sig timing : 0-2-1-2-1-2!

CMOS is available
Xchange PCI mem base OK: 00000000
Xchange PCI IO base OK: 00000000
Xchange irq OK: 0a
PCI command read for natsemi : 00000347
PCI Master Bit Setting...
pci_command set to:0357
0000 0080 009f 002f 00db 0058 , IRQ 12.
eth0: Transceiver status 0x00007869 advertising 000005e1
Hard Disk #0 : FUJITSU MHK2060AT 5729 Mo
Parameters :
Type 00000
Extended Type 00255
Sectors / track 00063
Landing Zone 00000
Control Byte 00000
Write Precomp 00000
Heads 00015
Nb of Cylinders 12416
HD size(cyl*sec by track*head*sector size) 06007 MO(decimal)
init nand set interupt
Flashfx version:520.001.001
Cannot mount flash drive No 0. Flash NAND may not be formatted !
Cannot mount flash drive No 0. Flash NAND may not be formatted !
NAND Flash Comfiguration:
CPU size : 32 MBytes
free spare blocks: 38
XMEM size : 0 MBytes
NAND Flash Details:
chip #0 : Type=TC58256 Id=9875H Size=32(MBytes) Unit size=16384 Page Size=512
time :sec=31,min=32,hour=15,DoW=06,date=06,Month=07,year=05
time :sec=35,min=32,hour=15,DoW=06,date=06,Month=07,year=05

ALIZE informations :
Memory Detected : 131072 Ko
Flash Detected
DaughterBoard Not Detected
XCHANGE Detected
XCHANGE Chip Initialization OK
Ethernet Found : 1
Ethernet Chip Initialization OK
Hard Disk Detected
Hard Disk Found : 1
DMA enabled
PCM11 selected
No HD trace

CPU at 133 mhz
check lock RTC
value of DIL switch 01

YOU CAN strike Ctrl B to enter in BIOS monitor during several seconds from NOW !

Caution: When this message is displayed, a timer is triggered (several seconds): Enter the sequence “Ctrl + B”

hit [Ctrl I] for BIOS monitor!
Enter the sequence “Ctrl + i”
Password?:
Type return (no password)

Watchdog disabled
Alize BIOS Monitor
*** BIOS Version 3EH30227EIAA bios100/008.033 ***
*** Generated on Nov/04/2004 at 14:51 ***

Monitor Light Menu

01 - Load From Hdisk #0
02 - Load From Ethernet
03 - Load From Flash NAND program
04 - Load From Flash NAND program and Bootp
05 - Load From Hdisk #0 and Bootp
06 - Display MAC address
07 - Display PCMS id
08 - Display System informations
09 - Full Options menu
10 - Reset System
? 2
Top
JoelO

Post by JoelO »

Is this a new HD?
Top
Post Reply

Return to “Media Gateway”