Alcatel Unleashed

Hello Every one
we have connected OXO and OXE OXO Rel 7.10-56 and OXE Rel 7.0 on VOIP Trunk,.The system is
working ok . OXE and OXE user can call each other But name cannot be displayed

User can see only extension no Name is not diplaying

Please help

Regards

If the Name display in EXt feature is check
try to use this way
go to External lines - protocols - ISVPN - then change the node number

hi
if the Display name in EXt feature is check
go to External lines - protocols- ISVPN then change the node number

morad wrote:hi
if the Display name in EXt feature is check
go to External lines - protocols- ISVPN then change the node number

Dear Morad

I am very sorry to reply you late as i was on vacation Thanks for your reply

Diplay feature is already checked. Default ISVPN node no is 255. what should we change it to. awaiting your reply. three OXE systems are connected with node numbers 1,2 and 3. where do we definen the node number in OXO

Put the OXO node 4

morad wrote:Put the OXO node 4

still not working we can see name from OXE to OXO but oxo recive or dialed cannot see the name


of extension programe in oxe

Have you put the names of the OXE users into the phone book of the OXO

On OXE:
1. Go to System->Other system parameters->external signalling parameters and put Calling name presentation=true
2. In user phone facility category change Calling name display (CNIP/I-CNAP)=true

What kind of IP trunk are you using (h323 or SIP)?
Have you seen any trace to verify the information that is being interchanged between both machines?
For my experience (OXE R9.1-OXO R6.1) I don't see any complementary info in OXE except extension number, otherwise in oxo I see the name programmed in oxe. But in the trace appears, and I suppose it is due to OXE programming.

I've tried as Prost says but it still not working.

Bye!