Alcatel Unleashed

Hi all,

One of the options is IPT4018 keys "transfer" and I have the following problem, I received a call and I wish to transfer to another extension IPT4018/IP shows me on screen "transfer rejected." This problem occurs to me only with IP phones. The option to transfer me works well with Analog Set with Flash option.

Now check the basic settings and also persists preoblema.
From already thank you very much to all who could help me!

Check if you have at least two the General Resource keys programmed on your set.

Chamizo

Check the following whether it is selected in feature rights of the set.
1. join incoming and incoming
2. join incoming and outgoing
3. join outgoing and incoming

Hi Kannan,

Thank you for your interest, yes, I have selected three feature rights..

Hi Chamizo,

Thanks for your interest. Yes, I have configured two keys with General Resource..

Hi Luis,

Check MF transparency is selected in the feature rights of the set. It is so then disable/uncheck it. The transfer should work.

Hi Kannan,

These are all that I have selected the option still does not work to transfer..

Part 1
1.Transfer to external
2.Join incoming and incoming
3.Join incoming and outgoing
4.Join outgoing and outgoing

Part 2
1.Camp on Allowed
2.Conference
3.Callback (automatic)
4.Name Display
5.Call Pickup Allowed
6.UUS Allowed
7.Selective Diversion

4018 doesn't receive a transfered call or doesn't allow to make a transfer from it?

Hi Elkiwi,

I can not transfer an incoming call and outgoing call, it shows me a message "transfer rejected"

Type of terminal is ok or is programmed with other type?