Page 1 of 4
how to install OXE on VMWare
Posted: 01 Apr 2010 09:26
by prasad0777
Dear all,
Can some one please tell me how to install OXE on VMWare. Since I'm new to OXE please be kind enough to make it from the very beginning.
Tanks
Posted: 02 Apr 2010 03:24
by freedom
Posted: 02 Apr 2010 04:12
by swinstation
Posted: 02 Apr 2010 08:29
by prasad0777
Thanks all for your help ...
As per my undastanding we use normal VMware for this & normal OXE file and PC installer. is it ?
Thanks
Prasad
Posted: 05 Apr 2010 06:25
by swinstation
no on pc installer you have to choose blade server and don't forget for your network adapter be bridge with your real network adapter,after booting your vmware boot from network and continue...let me know the result.
in my mind the virtual box is more friendly than vmware.
Posted: 05 Apr 2010 10:15
by prasad0777
As you said I went through virtual box & it seems very good. I'll go forward with birtual box. I will intstall it and try to install OXE. Please help me if I stuck. I'll let you know the proceedings.
Thanks
Posted: 07 Apr 2010 11:22
by prasad0777
I installed vertual box & try to install OXE R9 but couldn't do it. can any one please give me step by step procedure or screen shots if you dont mind.
Thanks
Posted: 07 Apr 2010 13:41
by swinstation
ok but it is necessary to mention you need act shelf or oxe hardware for running your machine.in your act you should put initip card on shelf 6 and connect to it with v24 and set it intipb.......
Posted: 08 Apr 2010 06:44
by prasad0777
But actually I don't want to run real OXE using VM ware. I just want it to learn my self here at my home. I have oxe at office where I can do testing and all that. but when I'm at home I need sort of vertual OXE system.
Posted: 08 Apr 2010 08:21
by swinstation
can you tell me what you can do exactly with your machine?for my information