Page 1 of 1
I can't see who's calling in analogic phone in OXO
Posted: 26 Feb 2010 16:19
by rodolfo.rodriguezv
Hi, I need help to configure extension with analogic phone to display caller ID, someone know how to do that or if that is possible in OXO?
regards
Rodolfo Rodríguez Valdés
Posted: 01 Mar 2010 12:31
by Michi
Hi,
the phone must have CLIP feature and the analog Subscriber-type has to be changed to "ab class". After that, it should work.
regards
Michi
Posted: 01 Mar 2010 20:41
by enio.eltz
Hi Rodolfo
It is possible to do it.
The protocol is FSK European.
Go to system miscellaneous --> memory read/write --> other labels --> R2NumExtF as 22 Hex.
At the extension you want, change it to Z set class at the field terminal and press modify.
It is this.
Best regards.
Posted: 26 Mar 2010 12:57
by rodolfo.rodriguezv
Hi Michi,
a did it, but don't work fine.
have you have other idea?
Posted: 26 Mar 2010 12:59
by rodolfo.rodriguezv
Hi Enio,
Changed R2NumextF to 22.
Changed the extensión to Z class.
But it dont't work
do you have other Idea aobut that?