Alcatel Unleashed

Hello:

We have a public PCM R2 trunk group with OXO R7. We can not display the caller ID on the internal sets. We can make calls and receive calls OK. The public trunk group if sending the caller ID (tested with OXE, actually this location had a working OXE for several years, where we could receive the caller ID). We have not found much information on setting up R2 trunks on OXO (on OXE we have done it many times). We are only missing the caller ID display of the external call on the sets.

Thanks for any hint on this matter.

Chamizo

Hi Chamizo

What kind of terminal you don't have CLIP?

If you are trying with analog set:

The protocol is FSK European.
Go to system miscellaneous --> memory read/write --> other labels --> R2NumExtF as 22 Hex.
At the extension you want, change it to Z set class at the field terminal and press modify.

Best regards.

este problema lo tenemos con los terminales digitales 4019, 4029,4039