Alcatel Unleashed

Hi there,

We have the following situation:

Master System: OXO R210_080.001
Slave System : OXO R210_080.001

The Master has about 8 ISDN Lines, the Slave is connected to the master over VoIP Line with 8 VoIP Channels and has NO public line !

My question is now: Is it possible to connect to the slave system through the master system with PM5 ??

thanks

Avi

I believe you mean using Modem connection, you should, if you create a DID to a extension of the second PBX.

But now modem over IP, as far as i know it's impossible because modem signals are more delicate than VoIP ones.

I made an DID to the slave system, but when i try to call it or connect to it with pm5 it always says "line busy".

The curious thing is, that my distributor says it should work. But i can't get any further information from them.

Any other ideas ?