SIP Congestion

[mustafa.ahmad]

Hi Ranjith,

You will need to install an SBC router with NAT configured to translate your Call server IP address to the STC SIP Server IP .

Attached is the sample of that configuration, for one of the sites configured for STC

[haroun]

Thanks Mustafa for sharing .that was a suggestion at the beggining.
even that signaling is working well but rtp are not if he posts wireshark we can state why , portsdue to firewall,sbc or some config missed at oxe

[mustafa.ahmad]

Sorry , I saw the later messages now only. It's working it seems. Only incoming is the problem .

[wagash]

Dear Mustafa,

Did you solve the incoming issue? I have a similar problem too. Share if you solved it.