Page 5 of 5

Re: Error coming when creating the External numbering Plan..

Posted: 17 Mar 2014 06:26
by shahin
HHAAHHA ,

Sorry for misunderstanding....

OK , now i understood the concept ,Once again thank you for your effort really appreciated....
Now the topic is solved...

Re: Error coming when creating the External numbering Plan..

Posted: 17 Mar 2014 06:35
by haroun
:lol:
good ,it's so easy with time you will be in, i'm also have made a mistake :shock: lol 516,1516, 5 doesn't iclude 521,522 means in your case if uo would to use them for 1521,1522 you have only to change range from 5 to 7 , if not eyoy have them as free for future use 8)

Re: Error coming when creating the External numbering Plan..

Posted: 17 Mar 2014 06:41
by shahin
Yes ..

Now i created to all extension is range 1 , so it easy to add for future use., i don't want to give direct line to all....

Re: Error coming when creating the External numbering Plan..

Posted: 17 Mar 2014 06:48
by haroun
i have think about to ask you to do it case by case , but i dont because i don't know waht 's exactly your situation may be you have lotof dl to distribute so by range is easier way , take a look to system doc, public networking is well documented with exemples (diffrent did for inc/outg, config with two carriers etc..)

Re: Error coming when creating the External numbering Plan..

Posted: 19 Mar 2014 10:04
by frank
shahin,

Copy and past the following commands into your terminal:

cdmao
echo "select * from DIDTRAD;"|cuser



Then copy and past the result in here.