Page 3 of 3

Re: Show the calling number

Posted: 12 Jan 2013 04:43
by stefanc
Hi all !

My operator support this, we can show the callers ID, how can I do it, så I can see for example in a T3 that a SETUP is done with correct caller no.

/S

Re: Show the calling number

Posted: 14 Jan 2013 02:31
by vad
You need to manage ext. callback translation (translator/ ext. dialing plan/ ext. callback translation). At least - basic number=DEF, delete=0

Re: Show the calling number

Posted: 14 Jan 2013 10:13
by stefanc
Yes, thats was done before, but I have a dim memory of a system parm that has to be checked, somthing with redirected, have gone thru them all but no success.
btw. the system is a 9.1.

Thanks for your time.

/Regards . S

Re: Show the calling number

Posted: 14 Jan 2013 16:56
by slabr
Are you totally sure your operator has enabled that function? If you can see proper number in T3 setup which is not seen on the destination, I think that your operator not allowing this (because of configuration on his side). Try to call on redirected number from another number from your pool, but as externall call not as internal.

Regards
Slawek

Re: Show the calling number

Posted: 14 Jan 2013 23:55
by vad
Show SETUP from t3 trace.

Re: Show the calling number

Posted: 25 Jan 2013 08:07
by stefanc
Hello everyone !.

I´ve been away for a while but here comes a trace with one comment on second setup.

Thanks you all for your help.

/S

______________________________________________________________________________
| (084652:000007) Concatenated-Physical-Event :
| long: 54 desti: 0 source: 0 cryst: 0 cpl: 24 us: 0 term: 0 type a5
| tei: 0 >>>> message received : SETUP [05] Call ref : 1c 30
|______________________________________________________________________________
|
| IE:[04] BEARER_CAPABILITY (l=2) 90 90
| IE:[18] CHANNEL (l=3) a9 83 87 -> T2 : B channel 7 exclusive
| IE:[6c] CALLING_NUMBER (l=11) -> 01 81 Num : 050461062
| IE:[70] CALLED_NUMBER (l=11) -> 81 Num : 0500465782
| [a1] Sending complete
|______________________________________________________________________________

______________________________________________________________________________
| (084652:000008) 1106: Send_IO1 (link-nbr=24, sapi=0, tei=0) :
| long: 23 desti: 0 source: 15 cryst: 0 cpl: 24 us: 8 term: 0 type a5
| tei: 0 <<<< message sent : CALL PROC (02) Call ref : 9c 30
|______________________________________________________________________________
|
| IE:[18] CHANNEL (l=3) a9 83 87 -> T2 : B channel 7 exclusive
|______________________________________________________________________________

______________________________________________________________________________
| (084652:000009) 1106: Send_IO1 (link-nbr=24, sapi=0, tei=0) :
| long: 22 desti: 0 source: 15 cryst: 0 cpl: 24 us: 8 term: 0 type a5
| tei: 0 <<<< message sent : PROGRESS (03) Call ref : 9c 30
|______________________________________________________________________________
|
| IE:[1e] PROGRESS_ID (l=2) 81 82
|______________________________________________________________________________

______________________________________________________________________________
| (084653:000010) 1106: Send_IO1 (link-nbr=23, sapi=0, tei=0) :
| long: 49 desti: 0 source: 15 cryst: 0 cpl: 23 us: 8 term: 0 type a5
| tei: 0 <<<< message sent : SETUP [05] Call ref : 42 19
|______________________________________________________________________________
|
| IE:[04] BEARER_CAPABILITY (l=2) 90 90
| IE:[6c] CALLING_NUMBER (l=12) -> 01 81 Num : 0500465782 <<<<<<< IT SHOULD BE 050461062
| IE:[70] CALLED_NUMBER (l=11) -> 81 Num : 0722206593
|______________________________________________________________________________

______________________________________________________________________________
| (084653:000011) Concatenated-Physical-Event :
| long: 23 desti: 0 source: 0 cryst: 0 cpl: 23 us: 0 term: 0 type a5
| tei: 0 >>>> message received : SETUP ACK [0d] Call ref : c2 19
|______________________________________________________________________________
|
| IE:[18] CHANNEL (l=3) a9 83 83 -> T2 : B channel 3 exclusive
|______________________________________________________________________________

______________________________________________________________________________
| (084702:000012) Concatenated-Physical-Event :
| long: 18 desti: 0 source: 0 cryst: 0 cpl: 23 us: 0 term: 0 type a5
| tei: 0 >>>> message received : CALL PROC (02) Call ref : c2 19
|______________________________________________________________________________

______________________________________________________________________________
| (084702:000013) Concatenated-Physical-Event :
| long: 18 desti: 0 source: 0 cryst: 0 cpl: 23 us: 0 term: 0 type a5
| tei: 0 >>>> message received : ALERT (01) Call ref : c2 19
|______________________________________________________________________________

______________________________________________________________________________
| (084702:000014) 1106: Send_IO1 (link-nbr=24, sapi=0, tei=0) :
| long: 18 desti: 0 source: 15 cryst: 0 cpl: 24 us: 8 term: 0 type a5
| tei: 0 <<<< message sent : ALERT (01) Call ref : 9c 30
|______________________________________________________________________________

______________________________________________________________________________
| (084780:000018) Concatenated-Physical-Event :
| long: 18 desti: 0 source: 0 cryst: 0 cpl: 23 us: 0 term: 0 type a5
| tei: 0 >>>> message received : CONNECT (07) Call ref : c2 19
|______________________________________________________________________________

______________________________________________________________________________
| (084780:000019) 1106: Send_IO1 (link-nbr=23, sapi=0, tei=0) :
| long: 18 desti: 0 source: 15 cryst: 0 cpl: 23 us: 8 term: 0 type a5
| tei: 0 <<<< message sent : CONNECT ACK (0f) Call ref : 42 19
|______________________________________________________________________________

______________________________________________________________________________
| (084780:000020) 1106: Send_IO1 (link-nbr=24, sapi=0, tei=0) :
| long: 18 desti: 0 source: 15 cryst: 0 cpl: 24 us: 8 term: 0 type a5
| tei: 0 <<<< message sent : CONNECT (07) Call ref : 9c 30
|______________________________________________________________________________

______________________________________________________________________________
| (084781:000021) Concatenated-Physical-Event :
| long: 23 desti: 0 source: 0 cryst: 0 cpl: 24 us: 0 term: 0 type a5
| tei: 0 >>>> message received : CONNECT ACK (0f) Call ref : 1c 30
|______________________________________________________________________________
|
| IE:[18] CHANNEL (l=3) a9 83 87 -> T2 : B channel 7 exclusive
|______________________________________________________________________________

______________________________________________________________________________
| (084794:000022) Concatenated-Physical-Event :
| long: 22 desti: 0 source: 0 cryst: 0 cpl: 23 us: 0 term: 0 type a5
| tei: 0 >>>> message received : DISCONNECT [45] Call ref : c2 19
|______________________________________________________________________________
|
| IE:[08] CAUSE (l=2) 80 90 -> [90] NORMAL CALL CLEARING
|______________________________________________________________________________

______________________________________________________________________________
| (084794:000023) 1106: Send_IO1 (link-nbr=24, sapi=0, tei=0) :
| long: 22 desti: 0 source: 15 cryst: 0 cpl: 24 us: 8 term: 0 type a5
| tei: 0 <<<< message sent : DISCONNECT [45] Call ref : 9c 30
|______________________________________________________________________________
|
| IE:[08] CAUSE (l=2) 81 90 -> [90] NORMAL CALL CLEARING
|______________________________________________________________________________

______________________________________________________________________________
| (084796:000024) Concatenated-Physical-Event :
| long: 18 desti: 0 source: 0 cryst: 0 cpl: 24 us: 0 term: 0 type a5
| tei: 0 >>>> message received : RELEASE [4d] Call ref : 1c 30
|______________________________________________________________________________

______________________________________________________________________________
| (084796:000025) 1106: Send_IO1 (link-nbr=24, sapi=0, tei=0) :
| long: 22 desti: 0 source: 15 cryst: 0 cpl: 24 us: 8 term: 0 type a5
| tei: 0 <<<< message sent : REL COMP [5a] Call ref : 9c 30
|______________________________________________________________________________
|
| IE:[08] CAUSE (l=2) 81 90 -> [90] NORMAL CALL CLEARING
|______________________________________________________________________________

______________________________________________________________________________
| (084796:000026) 1106: Send_IO1 (link-nbr=23, sapi=0, tei=0) :
| long: 22 desti: 0 source: 15 cryst: 0 cpl: 23 us: 8 term: 0 type a5
| tei: 0 <<<< message sent : RELEASE [4d] Call ref : 42 19
|______________________________________________________________________________
|
| IE:[08] CAUSE (l=2) 81 90 -> [90] NORMAL CALL CLEARING
|______________________________________________________________________________

______________________________________________________________________________
| (084797:000027) Concatenated-Physical-Event :
| long: 18 desti: 0 source: 0 cryst: 0 cpl: 23 us: 0 term: 0 type a5
| tei: 0 >>>> message received : REL COMP [5a] Call ref : c2 19
|______________________________________________________________________________

Re: Show the calling number

Posted: 07 May 2013 07:09
by miso
How can I do this for SIP trunk on OXE?

Re: Show the calling number

Posted: 09 May 2013 04:24
by tot3nkopf
miso wrote:How can I do this for SIP trunk on OXE?
Just the same. Additionally you can check how the provider sends calling number as you may need to modify which number is presented in external gateway parameters (maybe from P-Asserted-identity).

Re: Show the calling number

Posted: 02 Sep 2013 18:16
by krzysioD
Strange question, i think:
call gets from SIP trunk,

ACK sip:599504xxxxxx@192.168.179.10:5060 SIP/2.0
Via: SIP/2.0/UDP 194.123.11.182:36050;branch=z9hG4bK6ba1b138;rport
From: "0257851234" <sip:fromoxe@194.123.11.182>;tag=as17bafdd4
To: <sip:599504xxxxxx@192.168.179.10:5060>;tag=7258e7bf9401ffc89294db8b6188fd0a
Contact: <sip:fromoxe@194.123.11.182:36050>
Remote-Party-ID: "0257855123" <sip:0257855123@194.123.11.182>;privacy=off;screen=yes

But when call gets to isdn, the caller id - is an empty string:


______________________________________________________________________________
| (018519:000002) 1239: Send_IO1 (link-nbr=1, sapi=0, tei=0) :
| long: 40 desti: 0 source: 15 cryst: 4 cpl: 7 us: 8 term: 0 type a5
| tei: 0 <<<< message sent : SETUP [05] Call ref : 00 07
|______________________________________________________________________________
|
| IE:[04] BEARER_CAPABILITY (l=3) 80 90 a3
| IE:[6c] CALLING_NUMBER (l=2) -> 01 81 Num :
| IE:[70] CALLED_NUMBER (l=10) -> 81 Num : 50417xxxxxx
| [a1] Sending complete

any hints (I1.605.39)?