Page 3 of 3
Re: 8001 phones are not coming UP
Posted: 21 Mar 2024 03:34
by adrinraha
I made a backup via IC BIOS(Firmware copy) and copied it to the problem phone, but the problem was still not solved
Re: 8001 phones are not coming UP
Posted: 22 Jul 2024 02:51
by yaser-motiee
Hello
I need these files
"kernel and application"
please send to my Email.
yaser_motiee@yahoo.com
Thanks
Re: 8001 phones are not coming UP
Posted: 29 Jul 2024 06:11
by yaser-motiee
oukthr wrote: ↑21 Aug 2022 04:10
Hi, I submitted a service request to Alcatel, and they sent me this procedure, it works for 2 of three phones that have this probleme.
Hello my friend.
I need "kernel and application" for flash Alcatel ip-phone desktop 8001.
Can you share me the kernel and application.
thanks
yaser_motiee@yahoo.com
Re: 8001 phones are not coming UP
Posted: 03 Sep 2024 02:27
by skipper
oukthr wrote: ↑21 Aug 2022 04:10
Hi, I submitted a service request to Alcatel, and they sent me this procedure, it works for 2 of three phones that have this probleme.
Could you please share with me latest kernel and firmware for 8001?
skipper.com@gmail.com
Many thanks in advance!
Re: 8001 phones are not coming UP
Posted: 05 Sep 2024 13:10
by frank
Either you changed something on your data switch where the PoE is not sufficient anymore.
Or you changed something in the network a while back, never saved the conf in your switches, rebooted, and lost the conf.
I suggest you take 1 phone on a single data switch to remove the PoE issue, and configure this one switch correctly with dhcp helper if you are using the OXE/OXO has DHCP Server.
Re: 8001 phones are not coming UP
Posted: 11 Oct 2024 12:22
by Vanderlan
em 2024 , alguém tem alguma solução para o problema recorrente dos aparelhos Alcatel 8001
Re: 8001 phones are not coming UP
Posted: 14 Oct 2024 04:08
by Iridintelligence
Problem solved , the sip 8001 is Chinese deskphone commercialized by alcatel , "es290" of "ascene" , the problem is in hardware , replace two capacitors C9 and C17 were through-hole aluminum electrolytic capacitors. replace both electrolytic capacitors(C9, C17) to SMD(Surface Mount Device) capacitors with the following parameters.
SMD capacitor parameters:
0805/22uF±20% 6.3V X5R,
Then you can update it to the latest version of app 4.5.0.7 and kernel 3.0.5 , you find it in attachments
Re: 8001 phones are not coming UP
Posted: 19 Nov 2024 01:54
by yaser-motiee
Iridintelligence wrote: ↑14 Oct 2024 04:08
Problem solved , the sip 8001 is Chinese deskphone commercialized by alcatel , "es290" of "ascene" , the problem is in hardware , replace two capacitors C9 and C17 were through-hole aluminum electrolytic capacitors. replace both electrolytic capacitors(C9, C17) to SMD(Surface Mount Device) capacitors with the following parameters.
SMD capacitor parameters:
0805/22uF±20% 6.3V X5R,
Then you can update it to the latest version of app 4.5.0.7 and kernel 3.0.5 , you find it in attachments
************** Thank you my friend **************
Re: 8001 phones are not coming UP
Posted: 05 Dec 2024 06:00
by kevind
Thank you
Re: 8001 phones are not coming UP
Posted: 06 Dec 2024 00:55
by kevind
The software doesn't have Chinese language support. Are there any software options with Chinese language support? Where can I obtain them? Thank you.