Page 2 of 3
Re: OXE Reboot Loop
Posted: 17 Feb 2009 02:35
by talkhalidi
lool
, my friend i will do this , but how to Convince my manager the hard disk is fulty , omg anyway it seems there is no other way.
thanks alot , wish me good luck
Re: OXE Reboot Loop
Posted: 17 Feb 2009 04:15
by talkhalidi
am searching in the market for Compatible HDD 60 hitahci.
just man , are you sure the problem is HDD and if i replace it it will be fine?
lol i dont want to replace it and not working again otherwise he will blame me.
Re: OXE Reboot Loop
Posted: 17 Feb 2009 10:49
by cavagnaro
talkhalidi wrote:lool
, my friend i will do this , but how to Convince my manager the hard disk is fulty , omg anyway it seems there is no other way.
thanks alot , wish me good luck
come on a HD costs what? $80? Will not leave to bankrupt...
How to convince? Sit him next to you and show him that what ever you do it never works fine.
Re: OXE Reboot Loop
Posted: 17 Feb 2009 11:15
by krzysioD
Huh,
always first try to use good hardware, than blame soft...
not a very superb boss you got...
Re: OXE Reboot Loop
Posted: 14 Mar 2009 06:38
by config
1. CS mode Lola with slot 0
2. upload full SW to CS
3. power off CS
4. CS mode 0x001
5. upload full SW to CS
6. say log console
-----------------------------------
CPU at 133 mhz
check lock RTC
value of DIL switch 1
YOU CAN strike Ctrl B to enter in BIOS monitor during several seconds from NOW !
Dynamic Boot from No Boot Device selected
Dynamic Boot from No Boot Device selected
Dynamic boot is disabledÛ›Alize BIOS Monitor
-----------------------------------
it's Ok
Re: OXE Reboot Loop
Posted: 01 Apr 2009 12:14
by talkhalidi
i have replaced the HDD as suggested, uploaded the software again successfully, and the still the same. upon reboot it will not boot from hard disk it will go to bois light menu.
how i can restore the BOIS to defualt again?
Re: OXE Reboot Loop
Posted: 03 Apr 2009 08:17
by Rens_DUP
Hello talkhalidi,
Did you solve your issue? I'm currently haveing the same problem after an upgrade from release g1503.19c to g150323b.
When I put the hdd on another CS the system works fine so I know the HDD is working.
Regards,
Rens
Re: OXE Reboot Loop
Posted: 03 Apr 2009 08:46
by talkhalidi
No my freind, i thought replacing the HDD will solve it, it seems eaither the BOIS issue or the CS board fualty.
does any one how to customise the BIOS or restore the BOIS defualt settings?
Re: OXE Reboot Loop
Posted: 03 Apr 2009 08:50
by talkhalidi
currently this is what i have
Welcome to oxe1
Alcatel-Lucent OmniPCX Enterprise
login: mtcl
Password:
Last login: Thu Apr 2 14:35:27 from 192.168.254.101
Alcatel-Lucent OmniPCX Enterprise
standard installation last performed: 31-Mar-2009 15:17:54
# The role of the CPU is MAIN
Application software identity
R8.0.1-g1.503-17-d--c80s1
Business identification: R8.0.1
Release:
DELIVERY g1.503
Patch identification: 17
Dynamic patch identification: d
Country:
Cpu: c80s1
ACD VERSION
release : 8
bug_fixing : 1
protocol_id : 90
version_dy_hr_stat : 11
(1)oxe1
after shutdown -r now , it will boot then go to bois light monitor or reboot loop. and even if you should somtimes to load from HD0 somtimes it does not work.
Re: OXE Reboot Loop
Posted: 03 Apr 2009 08:55
by Rens_DUP
Strange, very strange, I guess I'll have to raise a question with Alcatel,
I'll keep you informed.
Regards,
Rens