Page 2 of 2
Re: create a sip trunk to sip provider,but have some problem.
Posted: 05 Aug 2008 11:07
by frank
Try this quickly..
Create an ARS prefix. Manage the discriminator.
In your route, put the SIP trunk. In the command table, just put the insert command.
give it a shot ..
Re: create a sip trunk to sip provider,but have some problem.
Posted: 06 Aug 2008 06:17
by alcatelboy
asking a question:
would the sip trunk can working in the OXE+vmware? use the sip phone can dial out through the sip trunk?
reguards
Re: create a sip trunk to sip provider,but have some problem.
Posted: 06 Aug 2008 11:45
by frank
yes and yes
Re: create a sip trunk to sip provider,but have some problem.
Posted: 01 Nov 2008 02:16
by alcatelboy
using the ars prefix and command dial table mode ,the TDM phone can dial out ,such as UAIP phone can dial out through the sip ISP,but when i use the sip phone can't not dial out .why?
Re: create a sip trunk to sip provider,but have some problem.
Posted: 03 Dec 2008 02:36
by tot3nkopf
Different codecs? Do you gave compressors on your system?