Alcatel Unleashed

Thanks for testing the new feature
Maybe the xlation is the solution. Depending from the hardware there are some "strange" things within the switches for the services. I have seen similar behavior in the past too (with X72/C32). So it will work without problems.
If you use xlation than I prefere to associate every vlan to an own service. So do not use at the SAP :all .
best regards
Silvio

silvio wrote: ↑23 Apr 2019 13:01 If you use xlation than I prefere to associate every vlan to an own service. So do not use at the SAP :all .
best regards
Silvio

Of course I agree; that's what I'm doing

Hi

You have to perform routing to reach the inline bvlan management ip.
Create an additional vlan on one of the switches and set the default gateway to the ip for the bvlan on this one on the other switches. The drawback is no redundancy for the management gateway at this time of code...