Alcatel Unleashed

can you ping this adress 10.200.7.157 from oxe
stc is public provider no SBC in between?!
5060 is only for signaling , you should chek also after that rtp's @ & ports

As there is not basic 200 OK from INVITE, no reason to dig yet on RTP ports haroun
First he must check the handshake

ofcorse cav ,once if he resolve the signaling path , he must just after check the rtp one , i suspect he will got an issue at rtp, but hope i'm wrong

Well he has all tips and evidence on his hands, lets see what (if) he answers back

Hello Experts,

there was some routing issue in firewall configuration. Now SIP packets are exchanged between the servers but i am not able to make & receive calls. I have attached level 3 traces.

My internal number is 100313 (example number) and number given by service provider is 0165299200. I did DID for incoming call but its not working. Service provider says that i am sending my internal number to them that's y they are getting " 484 Address Incomplete" error message when i am making outgoing calls.

hi
and the did validate at sip trunkg ?
your logs are duplicted and are for incoming calls ; response code is 404 not found so i think did is not working at al l that 'why SP say they see extension instead of installation number+did in the outgoing

btw i see sbc "s=SBC call" ?:-)

Hi Haroun,

Sorry for duplicate file. Now i have attached the outgoing logs.

Yes i believe DID is not working. Can you please let me know what are the parameters i need to touch. So that i can cross verify. Plz help me on this.

Thanks.

validate did transcoding at global parameter of trunk group
─Consultation/Modification: Faisceaux─────────────────────────────────────────┐
│ │
│ Faisceau privé + Non │
│ Variante signalisation Q931 + ABC-F │
│ Variante signalisation SS7 + Aucune │
│ Nombre chiffres à émettre : 29 │
│ Type sélection canaux + Quantité │
│ um.Q23 auto.sur appel sortant + Non │
│ Spécificité T2 + SIP │
│ seau homogéne pour RTP direct + Non │
│ Catégorie accès rés.public : 31 │
│ Transcodage SDA + Oui │
│ Accepte SUU dans le SETUP + Oui │
│ │
│ Priorité implicite │
│ │
│ Mode activation : 0 │
│ Niveau de priorité : 0 │
│ │
│ Préemptable + Non │
│ restriction d'appels entrants : 10 │
│ restriction d'appels sortants : 10 │
│ │
└──────────────────────────────────────

afater validating this paremetre go down in hirearchy numbering plan descriptor
exemple
─Consultation/Modification: Sélecteur de Plan de Num Faisceau─┐
│ │
│ No noeud-réseau (réservé soft) : 1 │
│ No faisceau : 1801 │
│ Instance (réservée soft) : 1 │
│ │
│ No Desc.Plan.Num public : 36 │
│ No Desc.Plan.Num privé : 36 │
│ Mode de gestion + Normal │
│
AND SEE what havebeen automaticly assigned and manage this npd according to sp ans rom ther you can select did rule orput full installation number

some commande to check :didtest

Can you please send me in English?
Thanks.

note those parameters are for my config


HERE NO did needed
┌─Consult/Modify: Trunk Groups─────────────────────────────────────────────────┐
│ │
│ Private Trunk Group + False │
│ Q931 signal variant + ABC-F │
│ SS7 signal variant + No variant │
│ Number Of Digits To Send : 29 │
│ Channel selection type + Quantum │
│ DTMF dialing on outgoing call + NO │
│ T2 Specificity + SIP │
│ genous network for direct RTP + NO │
│ Public Network Category : 31 │
│ DDI transcoding + True │
│ Can support UUS in SETUP + True │
│ │
│ Implicit Priority │
│ │
│ Activation mode : 0 │
│ Priority Level : 0 │
│ │
│ Preempter + NO │
│ ming calls Restriction categ. : 10 │
│ oing calls Restriction categ. : 10



┌─Consult/Modify: Trunk Group NPD Selector───────────┐
│ │
│ Node Number (reserved) : 1 │
│ Trunk Group Id : 1801 │
│ Instance (reserved) : 1 │
│ │
│ Public NPD id : ..Consult/Mo │
│ Private NPD id : 36 │
│ Management Mode + Normal │
│ │
└────────────────────────────────────────────────────┘


┌─Consult/Modify: Numbering Plan Description (NPD)─────────────────────┐
│ │
│ Node Number (reserved) : 1 │
│ Instance (reserved) : 1 │
│ Instance (reserved) : 1 │
│ Description identifier : 36 │
│ │
│ Name : ..sip │
│ Calling Numbering plan ident. + NPI/TON Private Specific Number │
│ Called numbering plan ident. + NPI/TON Private Specific Number │
│ Authorize personal calling num use + False │
│ Install. number source + None used │
│ Default number source + None used │
│ Called DID identifier : -1 │
│ Calling/Connected DID identifier : -1 │
│ │
└───────────────────────────────────────────────────


AS TOU SEE there is no did used ,identifier =-1

FOR OTHER EXEMPLE WERE DID IS MANAGED:
this one isdn all countries with no installation number -installation number is constructed at sp side he needs only the did
Consult/Modify: Trunk Groups─────────────────────────────────────────────────┐
│ │
│ Private Trunk Group + False │
│ Q931 signal variant + ISDN all countries │
│ SS7 signal variant + No variant │
│ Channel selection type + Channel No by Channel No. │
│ DTMF dialing on outgoing call + YES │
│ T2 Specificity + None │
│ genous network for direct RTP + NO │
│ Public Network Category : 0 │
│ DDI transcoding + True │
│ Can support UUS in SETUP + True │
│ │
│ Implicit Priority │
│ │
│ Activation mode : 0 │
│ Priority Level : 0 │
│ │
│ Preempter + NO │
│ ming calls Restriction categ. : 10 │
│ oing calls Restriction categ. : 10 │
│ mpt1343 callee number + NO

┌─Consult/Modify: Trunk Group NPD Selector───────────┐
│ │
│ Node Number (reserved) : 1 │
│ Trunk Group Id : 123 │
│ Instance (reserved) : 1 │
│ │
│ Public NPD id : 1 │
│ Private NPD id : 1 │
│ Management Mode + Expert

Consult/Modify: Numbering Plan Description (NPD)─────────────────────┐
│ │
│ Node Number (reserved) : 1 │
│ Instance (reserved) : 1 │
│ Instance (reserved) : 1 │
│ Description identifier : 1 │
│ │
│ Name : U_U_N_N_DDI │
│ Calling Numbering plan ident. + Unknown │
│ Called numbering plan ident. + Unknown │
│ Authorize personal calling num use + False │
│ Install. number source + None used │
│ Default number source + None used │
│ Called DID identifier : 1 │
│ Calling/Connected DID identifier : 1
┌─Consult/Modify: DDI number translator rules──────────────────────────┐
│ │
│ Node Number (reserved) : 1 │
│ Instance (reserved) : 1 │
│ Instance (reserved) : 1 │
│ DDI num. transl. identifier : 1 │
│ First External Number : 165 │
│ │
│ First Internal Number : 51009 │
│ Range Size : 1 │
│ Unique Internal Number + NO │
│ │
└──────────────────────────────────────────────────────────────────────┘



here full number constructed at my side, sp needs to see the whole number


┌─Consult/Modify: Trunk Groups─────────────────────────────────────────────────┐
│ │
│ Transcom Trunk Group + False │
│ Auto.reserv.by Attendant + False │
│ Overflow trunk group No. : -1 │
│ Tone on seizure + False │
│ Private Trunk Group + False │
│ Prefix Sending + False │
│ Number Of Digits To Send : 29 │
│ DTMF dialing on outgoing call + YES │
│ Public Network Category : 0 │
│ DDI transcoding + True │
│ Register Signalling + MF R2 │
│ │
│ Implicit Priority │
│ │
│ Activation mode : 0 │
│ Priority Level : 0 │
│ │
│ Preempter + NO │
│ ming calls Restriction categ. : 10 │
│ oing calls Restriction categ. : 10

┌─Consult/Modify: Numbering Plan Description (NPD)─────────────────────┐
│ │
│ Node Number (reserved) : 1 │
│ Instance (reserved) : 1 │
│ Instance (reserved) : 1 │
│ Description identifier : 35 │
│ │
│ Name : Haroun_Telcom │
│ Calling Numbering plan ident. + NPI/TON Isdn National │
│ Called numbering plan ident. + NPI/TON Isdn National │
│ Authorize personal calling num use + True │
│ Install. number source + NPD source │
│ Default number source + NPD source │
│ Called DID identifier : 2 │
│ Calling/Connected DID identifier : 2 │
│ Installation number : 03898 │
│ Default number( num. inst. sup.) : 2020

─Consult/Modify: DDI number translator rules──────────────────────────┐
│ │
│ Node Number (reserved) : 1 │
│ Instance (reserved) : 1 │
│ Instance (reserved) : 1 │
│ DDI num. transl. identifier : 2 │
│ First External Number : 2000 │
│ │
│ First Internal Number : 51009 │
│ Range Size : 1 │
│ Unique Internal Number + NO