Alcatel Unleashed

wizzy wrote:Also as far as I can remember, the GD position is at 1-0

ftye wrote:Hey guys....I finally got the procedure and it worked!!.



Please go through the procedure for transferring the voice guides using AAS into the system.



Transfer the wave file Alcatel Audio station.



Steps 1

Open the Alcatel audio station.
Select project. ---> new --> creation of empty vpr.file--->Name example xyz
select system scroll to dynamic voice guide.


Steps 2

select project
edit--> add--> select the wave file --> assign a five digit no example 00833-->
Give name example abc


Steps 3: compile



Steps 4 :save



Steps 5

Select Media--> transfer


Steps 6 select type dynamic message --> transfer file xyz.vpr



note:- it will select the directory /dhs3ext/vg/pc





Login to the 4400



You can check the file in directory cd /usr7/vg/pc the file which you have transferred through AAS.







Steps 7

mgr--> system-->descending --> dynamic voice guides--->(i) Import new files in database ---> validate

(ii) Clear import directory----> validate

(iii) Remove invalid files from database

System--> descending --> dynamic voice guides--->descending

(i) Assignment

Create VG Sub-message No. : 833

Add board shelf card



System--> descending --> dynamic voice guides--->descending ---> VG Message number-->

Descending---> Review/Modify

select All instances

VG Sub-message No. : 833 validate

File status Selected validate



Check the file in directory cd /usr7/vg/dhs the file which you have transferred through AAS with “^ “



which means this directory is active.



Now to test the voice guide create a tone test prefix. you can hear the dynamic guide bye entering the tone test prefix and the guide No

ftye wrote: ↑26 Apr 2005 10:05 How do I upload a dynamic voice guide saved in wave format (it is a file) from my hard drive to the omniPCX 4400. The audio station is only for static voice guides. I am trying to set up a new presentation/greeting guide