Page 2 of 3
Re: Configure OXO for 4135 IP Conference Phone
Posted: 28 Jun 2012 10:13
by Dilan
Hi,
There are steps in detail on how to set up the 4135 conf phone in the OXO installation manual/ Expert documentation.
BR
Dilan
Re: Configure OXO for 4135 IP Conference Phone
Posted: 11 Sep 2012 09:02
by ncedomir1
Hi,
Can someone send me a download link for firmware version 1.5.5 for OmniTouch Conference 4135 ?
Thanks ahead.
Re: Configure OXO for 4135 IP Conference Phone
Posted: 12 Jan 2015 13:27
by marure
OXE Common Hardware 4135IP Conference Phone. Version 9.1, The problem I have is you can make outbound calls ext - ext and external calls but you cannot receive calls ext - ext or incoming from outside. Any idea? again outbound calls work but not incoming calls.
Re: Configure OXO for 4135 IP Conference Phone
Posted: 13 Jan 2015 16:57
by cavagnaro
This is oxo section, not oxe. Post at least logs. Open a new thread.
Re: Configure OXO for 4135 IP Conference Phone
Posted: 17 Apr 2015 13:27
by lanruze
Hello,
I am havving the same issue too. I am trying to configure a new 4135 conference phone. but not successful yet. Please see log attached.
Also, how do i change port from 5060 to 5059 on the MMI/MMC.
Re: Configure OXO for 4135 IP Conference Phone
Posted: 20 Apr 2015 09:23
by giovanni.attolini
IP:PORT
ps: this kind of doubt must not be a technician's doubt
Re: Configure OXO for 4135 IP Conference Phone
Posted: 22 Apr 2015 04:13
by haroun
confg as sip estension or sip dev ?
Re: Configure OXO for 4135 IP Conference Phone
Posted: 29 Apr 2015 08:24
by lanruze
Configured as SIP extension on a OXO R8.2
Re: Configure OXO for 4135 IP Conference Phone
Posted: 29 Apr 2015 08:48
by cavagnaro
And now we have a duplicated thread...
Re: Configure OXO for 4135 IP Conference Phone
Posted: 06 Jul 2016 09:44
by Dilan
use the ip address to login to the web page of the 4135 phone.
then for registrar and proxy use ipaddress:5059 and it should work. you cant do this on the 4135 itself