Page 2 of 2
Re: OmniPCX Recording - Silent monitoring not working
Posted: 18 Mar 2012 08:33
by krzysioD
I think you will need some license for Omnipcx record too. And some hardware if not only ip-recording...
Re: OmniPCX Recording - Silent monitoring not working
Posted: 20 Mar 2012 02:04
by poposami
I am looking for OPS to try the RECORD application.
My OPS has lock 130 set to 1 .So It does not work with pcx record.
Could you provide yours (by email)
Thanks
Re: OmniPCX Recording - Silent monitoring not working
Posted: 28 Feb 2014 15:30
by astuto00
jacob87 Hello, I am also working with the OmniPCX Record but it does not work the Silent Monitor Might indicate where I changed the compression type on the PBX OXE? ...?
Re: OmniPCX Recording - Silent monitoring not working
Posted: 10 Mar 2014 12:43
by jpalbinet
On the OmniPCX Record server go to Program files\alcatel lucent\omnipcxrecord suite\Server
Find the configuration file named “OXERecordServer.exe.config”
open it in notepad
Change the value of CSTA_ESCREGREQ to 11 By default it is set to 234 which is Omnipcx record license.
Restart the recorder