Page 2 of 2
Posted: 13 May 2010 01:13
by ainy
Public gateway supports T38 fax
Posted: 13 May 2010 03:26
by sadim
OK, they support, now ask them to implement!
Posted: 30 May 2010 08:54
by filmil
Hi,
you can check following database items:
- IP/Fax Parameters/Fax Relay Max Rate = default is "9.6 Kbits/s" and you may try "14.4 Kbits/s" (it helped in our case for incomming direction)
note: this parameter maybe requires reset of relevant GD/GA/INT-IP board
- Users/Analog type = default is "No specific management" you may try "FAX"
note: this parameter works in association with IP / IP domain / FAX/MODEM call transparency
Regards