Page 2 of 2
Posted: 13 Apr 2010 22:16
by vad
Check Hardware and limits/ Main cabinet
Posted: 14 Apr 2010 08:43
by DFK
Hi Vad, it is CPIV and purchased a promo offer of OXO..Does CPIV by default contains VoIP card?
Posted: 14 Apr 2010 22:41
by vad
CPIV ? May be CPU-4? Quetion was not about main CPU (question was - you have one CPU or two, and have you VoIP board or not) - can you show main cabinet window?
About VoIP - Hardware and limits/ Main cabinet, right click on CPU board/ details
Posted: 16 Apr 2010 19:48
by elkiwi
Hardware and Limits --> Main Cabinet. There's a list of boards installed on the OXO
Sorry I didn' see page 2!!
Posted: 27 Apr 2010 08:41
by DFK
Hi all, Sorry for the delay reply.....This OXO doesn`t have any VoIP board with it..according to Alcatel representative we dont need VoIP board for Basic Pimphony as Promo offers contains 10 basic Pimphony license, is it correct? i dont need VoIP board for basic pimphony client??
If it is Ok then what IP should i insert while configuring PimPhony?
Thanks
Posted: 27 Apr 2010 11:24
by elkiwi
In that case CPU IP
Posted: 28 Apr 2010 10:03
by ileana
Hello DFK, well.. If you want to check your boards in the OXO, try to login in OMC with the IP of CPUboard an the password that you´ve configured. Then in Hardware&limits/ Main Cabinet you con check the boards of the system and daughter boards.
If you need to know the IP address of each board (CPU or CoCPU) follow this route: Hardware&limits/LAN-IP Configuration/Boards.
Posted: 04 May 2010 13:04
by maverick
Hello
ok, if you check the hardware, licenses, and all its correct. the problem maybe its in your PC, disable firewall in your PC, disble antivirus, or check firewall in the LAN. I had problems with this issues in diferente OS plataforms.
regards.