Page 2 of 3
Posted: 03 Apr 2010 06:56
by afeef
Hi bigmac
I have checked config 18, both board are in service, and i have created voice mail directory as well, but the thing is when i dial vm directory number it says the number dial is not authorized.
after that getting error: INIT: Warning: Too many lines in log file, some has been lost
timed out waiti
(1)cpu_4645> 03/04/10 13:09:46 000001M|001/01/0/001|=4:2011=No more TS between C
R 1 and CR 18 or no more conference resources
03/04/10 13:10:21 000001M|001/01/0/001|=4:2011=No more TS between CR 1 and CR 18
or no more conference resources
(1)cpu_4645> INIT: Warning: Too many lines in log file, some has been lost
timed out waiti
Regards
Afeef
Posted: 03 Apr 2010 18:58
by oldboy
Do you have a MADA card or compressors on your GD card?It would appear not as 4645 requires a compressor to work this will be your issue
Posted: 04 Apr 2010 13:49
by afeef
Hi oldboy,
yes, i have mada in gd, when i dial voice mail access prefix or voice mail consult prefix the voice guide says the number dial is not authorized. is anyone experience this kind of problem.
highly appreciate your comments.
Regards
Afeef
Posted: 04 Apr 2010 22:30
by oldboy
But do you have the compressors turned on? The errors above indicate that there are no Time Slots between the shelves meaning no compressors.
Posted: 06 Apr 2010 09:33
by bigmac
also check that the number of compressors that are licenced
Posted: 06 Apr 2010 10:05
by komar_666
To create a MailBox use the cmd "Eva_tools", if Voicemail application 4645 is in other CS (like an appliance server) Don't forget to configure Host files.
To check compressor use the cmd "compvisu lio" and other tools.
Posted: 06 Apr 2010 23:36
by afeef
All. Thank you very much.
I will check. i think Mada-3 card faulty or not working well.
Regards
Afeef
Posted: 07 Apr 2010 00:22
by vad
Or all compressors declared for external GW (or MADA used for conferences).
Look with commands - "config all" and "compvisu lio"
Posted: 13 Apr 2010 23:46
by afeef
Hi All
Again i have insert MADA-1 card, but still i voice mail not working, example when i pickup the handset it says you have voice mail consult mailbox please dial 43, when i dial 43 again hearing the voice guide the number dial is not authorized. and getting flowing error.
03/04/10 13:10:21 000001M|001/01/0/001|=4:2011=No more TS between CR 1 and CR 18 or no more conference resources
highly appreciate your comments.
Regards
Afeef
Posted: 14 Apr 2010 01:11
by vad
For VM not enough just insert MADA. Show GD management (MADA type, compressors for GW, IP devices, number of conference)
and outputs with commands "compvisu lio", " config all", "config 1 0 -d" (if you use GD in position 1-0).