ISDN RELEASE - CAUSE
ISDN RELEASE - CAUSE
An OXE is connected to ISDN network by PRI access. On outgoing attempt, the call is released, as soon as the remote party answers. Alcate OXE sends a message "MANDATORY INFORMATION ELEMENT IS MISSING", but I can not figure out what is wrong. Need your help, guys. Thanks
You do not have the required permissions to view the files attached to this post.
Re: ISDN RELEASE - CAUSE
connected number = blank
| (673046:000117) 1151: Send_IO1 (link-nbr=23, sapi=0, tei=0) :
| long: 26 desti: 0 source: 15 cryst: 0 cpl: 23 us: 8 term: 0 type a5
| tei: 0 <<<< message sent : STATUS [7d] Call ref : 6e 20
|______________________________________________________________________________
|
| IE:[08] CAUSE (l=3) 81 e0 04 -> [e0] MANDATORY INFORMATION ELEMENT MISSING
| IE:[14] CALL_STATE (l=1) 04
|______________________________________________________________________________
______________________________________________________________________________
| (673047:000118) Concatenated-Physical-Event :
| long: 63 desti: 0 source: 0 cryst: 0 cpl: 23 us: 0 term: 0 type a5
| tei: 0 >>>> message received : REL COMP [5a] Call ref : ee 20
|______________________________________________________________________________
|
| IE:[08] CAUSE (l=3) 82 e5 7d -> [e5] MESSAGE NOT COMPATIBLE WITH CALL STATE
| IE:[28] DISPLAY (l=38) `MESSAGE NOT COMPATIBLE WITH CALL STATE`
|______________________________________________________________________________
try to manage system reaction on reception of status at system parameter ignore all ie error case to yes
try to change dialling mode
witch protocl are using all countries or QSIG?
| (673046:000117) 1151: Send_IO1 (link-nbr=23, sapi=0, tei=0) :
| long: 26 desti: 0 source: 15 cryst: 0 cpl: 23 us: 8 term: 0 type a5
| tei: 0 <<<< message sent : STATUS [7d] Call ref : 6e 20
|______________________________________________________________________________
|
| IE:[08] CAUSE (l=3) 81 e0 04 -> [e0] MANDATORY INFORMATION ELEMENT MISSING
| IE:[14] CALL_STATE (l=1) 04
|______________________________________________________________________________
______________________________________________________________________________
| (673047:000118) Concatenated-Physical-Event :
| long: 63 desti: 0 source: 0 cryst: 0 cpl: 23 us: 0 term: 0 type a5
| tei: 0 >>>> message received : REL COMP [5a] Call ref : ee 20
|______________________________________________________________________________
|
| IE:[08] CAUSE (l=3) 82 e5 7d -> [e5] MESSAGE NOT COMPATIBLE WITH CALL STATE
| IE:[28] DISPLAY (l=38) `MESSAGE NOT COMPATIBLE WITH CALL STATE`
|______________________________________________________________________________
try to manage system reaction on reception of status at system parameter ignore all ie error case to yes
try to change dialling mode
witch protocl are using all countries or QSIG?
Re: ISDN RELEASE - CAUSE
I have "tested" this configurations, without effect. This a EURO ISDN (ISDN ALL COUNTRIES) Protocol
Re: ISDN RELEASE - CAUSE
you're right uour system is sending status
there is one more option some menues deeper like "send status on IE non existing" under system /other system /external signa parameteres
deactivate this option and try
there is one more option some menues deeper like "send status on IE non existing" under system /other system /external signa parameteres
deactivate this option and try
Re: ISDN RELEASE - CAUSE
I will give it a try and I hope it will work. Thanks