SIP Trunk CISCO VCS to OXE Alcatel

[haroun]

10.178.17.96 is tandberg terminal ?
10.178.8131 is vcs ?
where is oxe i don't see him at all in your call -only on option

[haroun]

if you use domain inernal name resolver should be at yes
node name : pst_n1
internal name resolver activated : yes
nslookup
C:\Users\b.haroun>nslookup
Serveur par dÚfaut : ana-ads04.aapac.mittalco.com
Address: 139.53.3.77

> pst_n1.aapac.mittalco.com
Serveur : ana-ads04.aapac.mittalco.com
Address: 139.53.3.77

Nom : pst_n1.aapac.mittalco.com
Address: 10.235.96.130

[haroun]

425573223 -> 138 [CMessage::sendAfterDns] resolution failed : gsa.dz

1425573223 -> 138 [CRequest::getProxyContext] Get proxy context from received context
1425573223 -> 110e [CProxyCall::forwardResponse] ---*--- LICENSES ---*--- A reserved license is released the INVITE is rejected
1425573223 -> 110e [CCall::makeGenericResponse] 404
1425573223 -> 110e [CCall::getDialog] Confirmed Dialog is not found (ID = ;7ab2a0c6c7515a5f)
1425573223 -> 152f [CDialog::createResponse] 404
1425573223 -> 2138 [CTransProceedingState::createResponse] CResponse 145 ref=1
1425573223 -> 145 [CMessage::send] sip_sendMessage (10.178.8.131:5060)
1425573223 -> SEND MESSAGE TO NETWORK (10.178.8.131:28745 [TCP]) (BUFF LEN = 547)

[haroun]

me to i was confused lol

[mokhtar ACFE]

10.178.17.96 is tandberg terminal yes .
10.178.8131 is vcs ? yes VCS vedeo call server.
Oxe is 10.178.17.202

[haroun]

lot of messages exchanged and only 3 max forward exchanged with only one different from 0.
i think gsa.dz is making confusion for csv

[David Macharia]

I have an Oxe Pabx linked with Cisco through a sip Trunk the issue i have is Cisco users can access an E1 in OXE and make a call but from OXE one can get the E1 line connected on Cisco but limited on dialing only 8 digit.Anybody who can help.Incoming call are working ok on both system.