7210 SAS-D endless boot loop

[autorun]

I was given Alcatel Lucent 7210 SAS-D that a previous user(s) messed up. When I'm booting it, it keeps looping in the console over and over. Here's the text it keeps looping: http://pastebin.com/raw.php?i=mtmYKZy6
Somehow he (or them) has managed to get two different versions to the switch and now it's confused which version it should boot.
So I'm wondering how I could fix it.
Thanks for helping,
autorun

[rekeds]

is that all?

Code: Select all

Alcatel-Lucent 7210 Boot ROM. Copyright 2009-2011 Alcatel-Lucent.
All rights reserved. All use is subject to applicable license agreements.
Testing ROM load area...done

Relocating code...Jumping to RAM

Performing second stage RAM test....passed

Board Serial Number is ''
Bootlog started for Version A-V-3.0.R5
Build V-3.0.R5 bootrom/mpc 7xxx
Built on Thu Jun 30 10:32:30 IST 2011 by builder in /builder/3.0B1/R5/panos/main

?Attempting to load from file cf1:/boot.tim
Version L-4.0.R7, Wed Jul  4 15:39:14 IST 2012 by builder in /builder/4.0B1/R7/panos/main
text:(3734997-->13196848) + data:(529584-->2069968)
Starting at 0xb000000...

where did you see "two versions"?

you'll probably end up opening the box and will have to put a proper boot.tim on it meant for the D series.

but you could post a longer log

the bootloader is v3 (you had to upgrade the bootstrapper) and now you have v4 image.
I think the latest is v7.

[autorun]

Guess I described it wrong then. I asked again, and turns out, that the previous user had accidentally loaded the bootloader and software that is meant for the 7210 SAS-M.

[rekeds]

"you'll probably end up opening the box and will have to put a proper boot.tim on it meant for the D series."
+ image