6400 switch continue to reboot and loop without stop

Post Reply
chuikingman

6400 switch continue to reboot and loop without stop

Post by chuikingman »

Hi,
I find my 6400 switch continu to reboot without stop .
I cannot stop it ..
What Can I do to fix it .. please advice ..

Below is the output from console

Code: Select all

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.08.16 09:25:06 =~=~=~=~=~=~=~=~=~=~=~=
PANIC: Remove USB Flash drive due to Bus Over-current threshold exceeded
       Insert a good USB Flash drive and activate USB interface (usb enable)PANIC: Remove USB Flash drive due to Bus Over-current threshold exceeded
       Insert a good USB Flash drive and activate USB interface (usb enable)PANIC: Remove USB Flash drive due to Bus Over-current threshold exceeded
       Insert a good USB Flash drive and activate USB interface (usb enable)PANIC: Remove USB Flash drive due to Bus Over-current threshold exceeded
       Insert a good USB Flash drive and activate USB interface (usb enable)PANIC: Remove USB Flash drive due to Bus Over-current threshold exceeded
       Insert a good USB Flash drive and activate USB interface (usb enable)PANIC: Remove USB Flash drive due to Bus Over-current threshold exceeded
       Insert a good USB Flash drive and activate USB interface (usb enable)PANIC: Remove USB Flash drive due to Bus Over-current threshold exceeded
       Insert a good USB Flash drive and activate USB interface (usb enable)PANIC: Remove USB Flash drive due to Bus Over-current threshold exceeded
       Insert a good USB Flash drive and activate USB interface (usb enable)PANIC: Remove USB Flash drive due to Bus Over-current threshold exceeded
       Insert a good USB Flash drive and activate USB interface (usb enable)Target Name: vxTarget 
User: target 
Attaching network interface lo0... done.

The current date and time is:
Coordinated Universal Time (UTC): FRI AUG 16 05:41:28 2013
Local time: FRI AUG 16 13:41:28 2013 LOCAL

Starting dynamic software load from '/flash/working/'...
Error accessing /flash/working/K2Ios.img. (errno = 0x27100001)
loadRemaining: Unable to load image file '/flash/working/K2Ios.img'.
 	 *****  Error loading image - Rebooting witho0?sR+NW??????aG?J
B?-???D???c????I?i?S???g?Kq?f?k??@k?@b??+??!)D1?CR?+|H??<??yk???????????=?'?9?p???-Y??{??5??????u?W??v=f?M???F}???u>5W????=???~??=/^???????>7^????????????????{????<V??[??s??8????????=>??{9?k?)?Z??USB2 Host Stack Initialized.
USB Hub Driver Initialized 
USBD  Wind River Systems, Inc. 562 Initialized
M824xHCI Controller found.
Waiting to attach to USBD...PANIC: Remove USB Flash drive due to Bus Over-current threshold exceeded
       Insert a good USB Flash drive and activate USB interface (usb enable)Done.
0xffffde0 (tRootTask): usbBulkDevInit() returned OK
usbCbiUfiDevInit() returned OK
CBI Class Driver Successfully Initialized

TFFS detected, mounting TFFS file system

Adding 10807 symbols for standalone.
Error on line 8: 'boot fsck 1
'.asciiBootParamsParse() failed.
WARNING: '/flash/boot.params' appears to be corrupt !!!
WARNING: Copying '/flash/boot.params' to '/flash/boot.params.CORRUPTED'...
WARNING: Removing '/flash/boot.params'...
Creating '/flash/boot.params' with defaults.


Boot parameters are:

 'tffs(0,0)lanswitch:default e=10.255.24.81:ff000000 h=192.168.10.1 g=10.255.24.181 cb=9600 cp=none cs=1 cw=8 cm=modemControlOff'


AOS kernel version: 6.4.5.474.R02
VxWorks (for Freescale MPC8247 ADS) version VxWorks5.5.1
KERNEL: WIND version 2.6
Made on Jul 25 2013, 05:21:38.
Copyright Wind River Systems, Inc., 1984-2006

CPU: Freescale MPC8247 ADS.  Processor #0.
Memory Size: 256 MBytes.  BSP version 1.2/1.

Portions of code copyrighted by Agranat Systems, Inc.  All Rights reserved
Portions of code copyrighted by Alcatel Internetworking, Inc. 1994-PANIC: Remove2013 USB Flash drive.  All Rights reserved
 due to Bus Over-Portions of code copyrighted by Apptitude, Inc. 1997-1999.  All Rights reserved
Portions of code copyrighted by Free Software Foundation, Inc. 1989,1991.  All rights reserved
currePortions of code copyrighted by The OpenLDAP Foundation 1999-2000.  All rights reserved
nt thresholdPortions of code copyrighted by Theodore T'so 1994,1995,1996,1997,1998,1999.  All Rights reserved
 ePortions of code copyrighted by RSA Security, Inc.  All Rights reserved
xceeded
Portions of code copyrighted by Sun Microsystems, Inc.  All Rights reserved
    Portions of code copyrighted by Wind River Systems, Inc.  All Rights reserved
  Portions of code developed by the University of California, Berkeley.
 Insert a Portions of code developed by the Carnegie-Mellon University.
good USB Flash dri

ve and activate USB interface (usb enable)PANIC: Remove USB Flash drive due to Bus Over-current threshold exceeded
       Insert a good USB Flash drive and activate USB interface (usb enable)PANIC: Remove USB Flash drive due to Bus Over-current threshold exceeded
       Insert a good USB Flash drive and activate USB interface (usb enable)PANIC: Remove USB Flash drive due to Bus Over-current threshold exceeded
       Insert a good USB Flash drive and activate USB interface (usb enable)PANIC: Remove USB Flash drive due to Bus Over-current threshold exceeded
       Insert a good USB Flash drive and activate USB interface (usb enable)PANIC: Remove USB Flash drive due to Bus Over-current threshold exceeded
       Insert a good USB Flash drive and activate USB interface (usb enable)PANIC: Remove USB Flash drive due to Bus Over-current threshold exceeded
       Insert a good USB Flash drive and activate USB interface (usb enable)PANIC: Remove USB Flash drive due to Bus Over-current threshold exceeded
       Insert a good USB Flash drive and activate USB interface (usb enable)PANIC: Remove USB Flash drive due to Bus Over-current threshold exceeded
       Insert a good USB Flash drive and activate USB interface (usb enable)PANIC: Remove USB Flash drive due to Bus Over-current threshold exceeded
       Insert a good USB Flash drive and activate USB interface (usb enable)Target Name: vxTarget 
User: target 
Attaching network interface lo0... done.

The current date and time is:
Coordinated Universal Time (UTC): FRI AUG 16 05:42:59 2013
Local time: FRI AUG 16 13:42:59 2013 LOCAL

Starting dynamic software load from '/flash/working/'...
Error accessing /flash/working/K2Ios.img. (errno = 0x27100001)
loadRemaining: Unable to load image file '/flash/working/K2Ios.img'.
 	 *****  Error loading image - Rebooting witho
JCJ,P?1????
R*K~B$rB?"J
bR?fRp?!???????Lo2cVX? NQ??jF??Y???Y?J????nRr?y?HN?9LBo?Cj?
Post Reply

Return to “OmniSwitch 6400”