Hi Guys
I intalled MyIC v 2.7.00.33.000 but when i select My Current Phone>>My Computer displays a message that says The Voice over IP module can not be initialized.
Note: In windows XP working very good, the problem is in Windows 7
Any ideas? my ICS is 6.7.0
The Voice over IP module can not be initialized.
The Voice over IP module can not be initialized.
You do not have the required permissions to view the files attached to this post.
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: The Voice over IP module can not be initialized.
Check logs, firewall, network, etc. Usually is a network connectivity issue.
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Re: The Voice over IP module can not be initialized.
Hi cavagnaro,
I check the log, off the firewall, antivirus, run the MyICS with administrator privilegies , i check the network but the problema persist and i get new message
I check the log, off the firewall, antivirus, run the MyICS with administrator privilegies , i check the network but the problema persist and i get new message
You do not have the required permissions to view the files attached to this post.
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: The Voice over IP module can not be initialized.
Have you configured GD/INTIP board on ICS nomadic parameters?
can you ping the GD/INTIP board configured there?
can you ping the GD/INTIP board configured there?
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Re: The Voice over IP module can not be initialized.
Hello, Felinux, did you fixed the issue, I have the same problem.
Thanks,
Thanks,