GD-3 board keeps rebooting

[cbowser814]

I'm not sure what the problem is with this. I've checked all the connections to the call server and everything should be passing traffic fine. When I jack in on the config port I see the boot sequence and I can even interrupt it with ^B^I, but the only options I'm given at that point is to load from different media or reset. As I'm not the one who set this up originally I'm not sure I want to reset and I don't have files. I've tried turning the system off and back on a couple times with no luck. I really need someone to point me in the right direction to get it to stop rebooting.

Thanks in advance,

Chuck Bowser

[giovanni.attolini]

Ok, when you choose to boot from an internal media, it comes up or not? This question is to know if your board has or not OS installed.
Verify if your serial console is sending your CTRL + B correctly, sometimes the problem is how your keyboard is configured or what kind of emulation your console is trying to do.

Let us know the results