Can i desactive broadcast reception on my INTIP Board

[jpissot]

Hi,

My intip2 boards are reseting because there are broadcast on the LAN. I see message "...Broadcast..." with incvisu command.


The time that the data guy find the network trouble, can I desactivate broacast reception on my INTIP to avoid the reset.

Thanks for your help.

[tgn]

the intip try to ignore the broadcast messages by itself. but the keepalive packets from callserver cannot be received, if there is to many broadcast in network.
please take a look in the alu ip network design guide. and then redesign your network (split it in vlan's).

regards...