mgr don´t start/ no dynamic ports

[Lokol]

Hi ! Does anyone seen a thing like this? i look in netadmin and see the standart ports from 10000 - 10499. We have the problem only on this system. After a some weeks its running i´ve get this and have to make an reboot. We have the problem with R6.2, R7.0 and now with R9.1 on this system.


2)xa001002> mgr

ooo Reading string-file /DHS3bin/oneshot/mtcl/common.US0 ...

ooo Reading string-file /DHS3bin/oneshot/mtcl/objects.US0 ...

ooo Reading string-file /DHS3bin/oneshot/mtcl/objerrh.US0 ...

BIND error

panic: Can't initialize CMISE






18/10/12 10:12:08 000002M|000/00/0/000|=3:1529=Kernel: Lack of dynamic port 6 (6
=TCP, 17=UDP)

Incident number (q to quit):1529

INCIDENT NUMBER: 1529
Network indicator: Alcatel 4400
OBJECT CLASS: Dhs3Terminal
EVENT TYPE: ProcessingErrorAlarm (10)
PROBABLE CAUSE: Unknown (0)
SEVERITY: Minor

"Kernel: Lack of dynamic port P1 (6=TCP, 17=UDP)"
"P1 : Type of resource:"
" 6 : proto TCP,"
" 17 : proto UDP."
"Insufficient resource"
"System lacks dynamic port (for proto P1). Dimensioning rules"
"should be reviewed if the symptom persists."
"Several application may not work."
"Check the dynamic port dimensioning with Netadmin."
"If the fault persists, note the incident with all its information"
"on an observation sheet (problem report), specifying if possible"
"the error context.";

Incident number (q to quit):

[jonnel_ponesto]

Hi,

Have you fixed this issue? I have the same issue with our customer which has more than 10 Nodes connected. In your case is this a single Node?

Thank you and regards,

Jonnel

[Lokol]

no. i haven´t fixed it. this is the only node of a network of ~10 nodes whith the problem. i use the standby cpu to use mgr. i have seen that there are ~30 user mtcl are loggt in. (linux command:"users") . maybe some networktools of the customer.....